How to Service and Repair the Right Exhaust Manifold on 2005 Dodge Ram 1500?

Always begin by disconnecting the negative cable from the battery before you raise and support your vehicle. Take out the nuts and bolts from under the exhaust pipe and engine exhaust manifold and lower the vehicle. Subsequently, remove the exhaust heat shield and detach the bolts, nuts and washers attaching the manifold to the cylinder head, followed by you pulling off the manifold and gasket on the cylinder head. If you replace the nuts and pulled out their studs at the same time, install new studs on the threaded side, with dried silicone, to prevent leaks from happening. Place the engine exhaust manifold alongside the gasket, getting it into the two studs on the cylinder head and then bolt them both in place using conical washers and nuts. After that, install the other conical washers and tighten the bolts and nuts to 25 Nm or 18 ft. lbs. Starting with the center arm, work your way out to finish tightening all the nuts and bolts. Once again install the exhaust heat shields, this time making sure not to use too much force on the fasteners so you don't damage them. Insert the exhaust pipe into the manifold, secure it with bolts, nuts and retainers and tighten each to 34 Nm (25 ft. lbs.) torque.

OEM 2005 Dodge Ram 1500 Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Exhaust Manifolds found

View related parts
2005 Dodge Ram 1500 Exhaust Manifold, Passenger Side Part Number: 53032418AE
$236.53 MSRP: $491.00
You Save: $254.47 (52%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 53032418AD, 53032418AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032418AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2005 Dodge Ram 1500 Exhaust Manifold, Driver Side Part Number: 53030809AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Item Weight: 9.30 Pounds
- Item Dimensions: 6.9 x 6.4 x 23.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030809AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, TRX4 | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Ram 1500 Exhaust Manifold, Passenger Side Part Number: 53030808AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Exhaust Manifold Gasket; Manifold Gasket; Manifold; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 8.50 Pounds
- Item Dimensions: 7.9 x 8.1 x 18.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030808AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, TRX4 | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2005 Dodge Ram 1500 Exhaust Manifold, Passenger Side Part Number: 53032198AZ
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 53032198AE
- Item Weight: 10.60 Pounds
- Item Dimensions: 21.9 x 6.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032198AZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Ram 1500 Exhaust Manifold, Passenger Side Part Number: 5037122AC
$111.60 MSRP: $165.00
You Save: $53.40 (33%)
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold; Manifold Exhaust
- Position: Passenger Side
- Replaces: 5037122AB
- Item Weight: 10.60 Pounds
- Item Dimensions: 28.1 x 10.1 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037122AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- SRT-10 | 10 Cyl 8.3 L GAS
View related parts
2005 Dodge Ram 1500 Exhaust Manifold, Driver Side Part Number: 5037123AC
$182.41 MSRP: $269.00
You Save: $86.59 (33%)
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Replaces: 5037123AB
- Item Weight: 22.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037123AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- SRT-10 | 10 Cyl 8.3 L GAS
View related parts
2005 Dodge Ram 1500 Exhaust Manifold, Driver Side Part Number: 53032197AY
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 53032197AE
- Item Weight: 9.60 Pounds
- Item Dimensions: 22.9 x 6.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032197AY
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Ram 1500 Exhaust Manifold, Driver Side Part Number: 53032613AD
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 53032613AB, 53032613AC, 53032613AA
- Item Weight: 9.40 Pounds
- Item Dimensions: 13.3 x 12.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032613AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- ST, SXT | 3.7L V6, 6 Cyl 3.7 L GAS

2005 Dodge Ram 1500 Exhaust Manifold Parts and Q&A

Q: How to Service and Repair the Right Exhaust Manifold on 2005 Dodge Ram 1500?
A: Always begin by disconnecting the negative cable from the battery before you raise and support your vehicle. Take out the nuts and bolts from under the exhaust pipe and engine exhaust manifold and lower the vehicle. Subsequently, remove the exhaust heat shield and detach the bolts, nuts and washers attaching the manifold to the cylinder head, followed by you pulling off the manifold and gasket on the cylinder head. If you replace the nuts and pulled out their studs at the same time, install new studs on the threaded side, with dried silicone, to prevent leaks from happening. Place the engine exhaust manifold alongside the gasket, getting it into the two studs on the cylinder head and then bolt them both in place using conical washers and nuts. After that, install the other conical washers and tighten the bolts and nuts to 25 Nm or 18 ft. lbs. Starting with the center arm, work your way out to finish tightening all the nuts and bolts. Once again install the exhaust heat shields, this time making sure not to use too much force on the fasteners so you don't damage them. Insert the exhaust pipe into the manifold, secure it with bolts, nuts and retainers and tighten each to 34 Nm (25 ft. lbs.) torque.