OEM 2005 Dodge Ram 3500 Windshield Washer Nozzle

2005 Dodge Ram 3500 Windshield Washer Nozzle Parts and Q&A

• Q: How to Maintain Your Windshield Washer Nozzle on 2005 Dodge Ram 3500?

  A: Service the windshield washer spray nozzle by lifting off the wiper arms at the pivots and opening the hood. After that, remove the cover or grille that sits over the cowl plenum. Remove the hose from the washer nozzle's barbed end at the bottom of the cowl plenum cover/grille panel and release its integral latch so the unit slides upward and out through that hole. Separate the washer nozzle from the top of the cowl plenum cover/grille panel. To attach the washer nozzle, place its opening through the mounting hole and then insert the notched wings into the notches there. Push down on the top of the washer nozzle so that the holding latches snap into place underneath the cowl plenum cover/grille panel. Connect the washer hose to the barbed socket of the nozzle and rout the washer nozzle hose back into its clamps on the underside of the cowl plenum or grille cover. After that, replace the cowl plenum cover/grille panel on the cowl plenum, close and latch the hood and put both wiper arms back onto their pivots.