How to Service a MAP Sensor on 2005 Dodge Stratus?

The first thing you should do is separate the negative battery cable when servicing the Manifold Pressure/Vacuum Sensor. After that, pull out the electrical connector from the MAP sensor and undo the two screws holding it to the intake manifold. When installing, set the sensor and screw it onto the controller board using the screws provided. After that, return the electrical connector to the MAP sensor and lastly reconnect the negative battery cable.

OEM 2005 Dodge Stratus MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2005 Dodge Stratus M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, R/T, SE, SXT | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2005 Dodge Stratus MAP Sensor Parts and Q&A

Q: How to Service a MAP Sensor on 2005 Dodge Stratus?
A: The first thing you should do is separate the negative battery cable when servicing the Manifold Pressure/Vacuum Sensor. After that, pull out the electrical connector from the MAP sensor and undo the two screws holding it to the intake manifold. When installing, set the sensor and screw it onto the controller board using the screws provided. After that, return the electrical connector to the MAP sensor and lastly reconnect the negative battery cable.