How to Remove and Install an Oxygen Sensor in the Exhaust Manifold on 2005 Dodge Stratus?

An oxygen sensor that heats up is placed in the exhaust manifold of the engine. First, take out the negative battery cable and then remove the heated oxygen sensor connector, without pulling the sensor's wire. Use either a Snap-On YA8875 socket or a crow foot wrench to take out the oxygen sensor. The installation requires you to clean the exhaust manifold threads with an 18 mm X 1.5 + 6E tap. Should you want to use the original sensor, smear an anti-seize compound or its equivalent, onto the sensor screw threads, since those from new sensors are already pre-coated. Adjust the sensor so it reaches 28 Nm (20 ft. lbs.), reattach the heated oxygen sensor connector to its electrical plug and then reinstall the negative battery cable.

OEM 2005 Dodge Stratus Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Oxygen Sensors found

View related parts
2005 Dodge Stratus Oxygen Sensor, Front Part Number: 56029050AA
$77.38 MSRP: $114.00
You Save: $36.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.5 x 4.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029050AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Dodge Stratus Oxygen Sensor, Front Driver Side Part Number: 56029049AA
$97.32 MSRP: $144.00
You Save: $46.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.3 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56029049AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Dodge Stratus Oxygen Sensor, Front Part Number: 4606133AD
$91.13 MSRP: $191.00
You Save: $99.87 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Rear; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.3 x 28.5 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606133AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Dodge Stratus Oxygen Sensor, Front Passenger Side Part Number: MN158757
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front Right; Sensor Oxygen
- Position: Front Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.9 x 1.0 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN158757
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- R/T | 6 Cyl 3.0 L GAS
View related parts
2005 Dodge Stratus Oxygen Sensor, Rear Part Number: MR560365
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR560365
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Stratus Oxygen Sensor, Front Part Number: MR560364
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.6 x 1.3 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR560364
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- ES, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Stratus Oxygen Sensor, Rear Driver Side Part Number: MN158759
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear Left; Sensor Oxygen
- Position: Rear Driver Side
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN158759
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- R/T | 6 Cyl 3.0 L GAS
View related parts
2005 Dodge Stratus Oxygen Sensor, Front Driver Side Part Number: MN158758
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front Left; Sensor Oxygen
- Position: Front Driver Side
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MN158758
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Stratus Submodels:
- R/T | 6 Cyl 3.0 L GAS

2005 Dodge Stratus Oxygen Sensor Parts and Q&A

Q: How to Remove and Install an Oxygen Sensor in the Exhaust Manifold on 2005 Dodge Stratus?
A: An oxygen sensor that heats up is placed in the exhaust manifold of the engine. First, take out the negative battery cable and then remove the heated oxygen sensor connector, without pulling the sensor's wire. Use either a Snap-On YA8875 socket or a crow foot wrench to take out the oxygen sensor. The installation requires you to clean the exhaust manifold threads with an 18 mm X 1.5 + 6E tap. Should you want to use the original sensor, smear an anti-seize compound or its equivalent, onto the sensor screw threads, since those from new sensors are already pre-coated. Adjust the sensor so it reaches 28 Nm (20 ft. lbs.), reattach the heated oxygen sensor connector to its electrical plug and then reinstall the negative battery cable.