Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 Dodge Stratus Relay Block

Relay Fuse Box
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Relay Blocks found

  • 2005 Dodge Stratus Relay Block - MR588530
    2005 Dodge Stratus Relay Block - MR588530
    2005 Dodge Stratus Relay Block Diagram - MR588530
    View related parts

    2005 Dodge Stratus Distribution Box Part Number: MR588530

    Product Specifications
    • Other Name: Block; Fuse Box; Power Distribution Center
    • Item Weight: 2.10 Pounds
    • Item Dimensions: 10.1 x 7.5 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: MR588530
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Stratus Submodels:
    • R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
  • 2005 Dodge Stratus Relay Block - MR502415
    2005 Dodge Stratus Relay Block Diagram - MR502415
    View related parts

    2005 Dodge Stratus Relay Box Part Number: MR502415

    Product Specifications
    • Other Name: Block - Relay; Junction Boxes; Relay Boxes; Fuse Box; Block Relay
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 6.9 x 4.6 x 1.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: MR502415
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Stratus Submodels:
    • R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
  • 2005 Dodge Stratus Relay Block - 4759434AC
    2005 Dodge Stratus Relay Block Diagram - 4759434AC
    View related parts

    2005 Dodge Stratus Junction Block Part Number: 4759434AC

    Product Specifications
    • Other Name: Block - Premium; Junction Boxes; Fuse Box; Junction Block Premium
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 14.3 x 9.3 x 3.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4759434AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Stratus Submodels:
    • ES, R/T, SE, SE Plus, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2005 Dodge Stratus Relay Block Parts and Q&A

  • Q: How is a Faulty Relay Block Serviced and Replaced in a Power Distribution Center on 2005 Dodge Stratus?
    A: Since the Power Distribution Center is joined with the headlamp/dash wire harness, if any problem or damage occurs in any internal part or housing, the whole unit must be exchanged. Separate the negative battery cable and then take off the Air Inlet System housing, as well as the resonator. Separate all wire harness connector pins and remove the ground eyelets from the body and chassis means of fixation using the screws or clamps as necessary. Separate the engine compartment harness from the retainers attached to the car body and chassis and then remove the nut keeping the PDC installed in its bracket. Drive the car out of the space and observe the engine compartment, then take the PDC and wire harness as a unit with care. During installation, place the PDC in the engine compartment and insure that its slots line up with the blades on the bracket, then fit the mounting nut onto the PDC. Route the cable connection through the engine compartment, clamping each harness retainer to the place provided in the vehicle body and chassis components. Secure each ground eyelet to the body and chassis using the fasteners, plug in each connector, after that, put the negative cable on the battery.

Related 2005 Dodge Stratus Parts

Alternate Year Models

+
2004 Dodge Stratus Relay Block 2006 Dodge Stratus Relay Block