How to Maintain the Lower Control Arm on 2005 Jeep Grand Cherokee?

First, lift and support the vehicle, then take out the tire and wheel before proceeding. After that, unhook the steering knuckle and the shock clevis bracket from the bottom of the control arm. Take off the nut and bolt from the lower control arm at the front, then remove all the bolts and flag nuts at the rear. When these pieces are off, lift out the lower control arm from the car. When installing, attach the lower suspension arm bracket to the frame rail and secure the rear bolts of the lower control arm to the frame and tight them to 142 Nm (105 ft lbs). After that, set the nut and bolt on the front of the lower control arm and tighten them to 169 Nm (125 ft. lbs.). Following this, put the lower clevis bolt (2) in the hole at the bottom control arm and screw it till tight enough, then apply 75 Nm (55 ft. lbs.) of torque to the steering knuckle (3) nut that goes there. After that, install the tire and wheel back in place, lower the car and perform a tire alignment.

OEM 2005 Jeep Grand Cherokee Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Control Arms found

View related parts
2005 Jeep Grand Cherokee Upper Control Arm, Front Part Number: 52090206AI
$300.25 MSRP: $447.00
You Save: $146.75 (33%)
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Front Upper Suspension Control Arm and Ball Joint Assembly.; Arm Upper Control Front; Control Arm
- Position: Front Upper
- Replaces: 52090206AD, 52090206AG, 52090206AE, 52090206AH, 52090206AC, 52090206AF
- Item Weight: 3.10 Pounds
- Item Dimensions: 14.3 x 14.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52090206AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2005 Jeep Grand Cherokee Lower Control Arm, Front Driver Side Part Number: 52089981AI
$649.74 MSRP: $987.00
You Save: $337.26 (35%)
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Left Suspension Control Arm and Ball Joint Assembly; Control Arm Bushing.; Arm Lower Control Front; Control Arm
- Position: Front Lower Driver Side
- Replaces: 52089981AD, 52089981AG, 52089981AF
- Item Weight: 26.60 Pounds
- Item Dimensions: 20.4 x 19.9 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089981AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2005 Jeep Grand Cherokee Lower Control Arm, Front Passenger Side Part Number: 52089980AI
$649.74 MSRP: $987.00
You Save: $337.26 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Right Suspension Control Arm and Ball Joint Assembly.; Arm Lower Control Front; Control Arm
- Position: Front Lower Passenger Side
- Replaces: 52089980AG, 52089980AD, 52089980AF
- Item Weight: 26.20 Pounds
- Item Dimensions: 21.5 x 20.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089980AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6.1L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2005 Jeep Grand Cherokee Upper Control Arm, Rear Part Number: 52089629AC
$113.73 MSRP: $173.00
You Save: $59.27 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Suspension Control Arm, Rear Upper; Arm Upper Control Rear; Suspension Control Arm; Control Arm
- Position: Rear Upper
- Replaces: 52089629AB
- Item Weight: 5.50 Pounds
- Item Dimensions: 19.5 x 2.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089629AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2005 Jeep Grand Cherokee Lower Control Arm, Rear Part Number: 52089630AC
$98.69 MSRP: $217.00
You Save: $118.31 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Rear Lower; Arm Lower Control Rear; Suspension Control Arm; Control Arm
- Position: Rear Lower
- Replaces: 52089630AB
- Item Weight: 5.90 Pounds
- Item Dimensions: 2.7 x 2.9 x 20.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52089630AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Overland, SRT8 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2005 Jeep Grand Cherokee Control Arm Parts and Q&A

Q: How to Maintain the Lower Control Arm on 2005 Jeep Grand Cherokee?
A: First, lift and support the vehicle, then take out the tire and wheel before proceeding. After that, unhook the steering knuckle and the shock clevis bracket from the bottom of the control arm. Take off the nut and bolt from the lower control arm at the front, then remove all the bolts and flag nuts at the rear. When these pieces are off, lift out the lower control arm from the car. When installing, attach the lower suspension arm bracket to the frame rail and secure the rear bolts of the lower control arm to the frame and tight them to 142 Nm (105 ft lbs). After that, set the nut and bolt on the front of the lower control arm and tighten them to 169 Nm (125 ft. lbs.). Following this, put the lower clevis bolt (2) in the hole at the bottom control arm and screw it till tight enough, then apply 75 Nm (55 ft. lbs.) of torque to the steering knuckle (3) nut that goes there. After that, install the tire and wheel back in place, lower the car and perform a tire alignment.