Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Jeep Wrangler Submodels:
Rubicon, SE, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
2005 Jeep Wrangler Seat Cover Parts and Q&A
Q: How to Service and Repair a Front Seat Cover for Seat Back on 2005 Jeep Wrangler?
A: First, take off the seat and get rid of the j-straps that hold the seat back at its bottom. After that, take away the two hog rings at the bottom and the top and then take out the rods from the seat back support. Use a trim stick C-4755 or one of the same size to pull out and remove the knob before taking out the screw to remove the metal center cap. After you have unbuttoned the seat, pull out the seat cover and cushion. For the chair cover, first place and fix the back cushion, then install the bezel over the release handle and have it screwed in. Put in a fresh release handle knob first, then add the support rods, upper hog rings and after them the bottom hog rings. Afterward, link the j-straps from the bottom of the seat back and attach the seat back onto the seat frame.