Before you begin, make sure to read every caution and warning. In the case of two-door couches, set the cover over the cushion and attach everything with hog rings. After that, lay the seat back cushion on the frame, zip the cover and attach the J-straps. Fit the seat headrest attachments into the frame of the seat back and after that, attach the seat back to the
Seat Cushion and fix them using the cushion bolts to 50 Nm (37 ft. lbs.). Once you're done with the four-door basics, add the seat belt bezel and the covers for the latch bars. Attach the front and back cushions to the seat back by screwing on the pivot bolts, then set them to a torque of 25 Nm (18.5 ft. lbs.),and insert the screws, complete with the release handle. At the last stage, put the two seat halves together. In both cases, put the seat and headrest in place as stated in the recommended service instructions.