How to Maintain and Fix a Brake Booster on 2006 Chrysler 300?

In order to fix the vacuum brake booster, adjust the seat of the driver to the back, make sure that the battery is disconnected and the master cylinder is out. Detach booster push rod, remove mounting nuts and remove booster. Install the new booster and make sure that it is well connected and reassemble parts before testing the brakes.

OEM 2006 Chrysler 300 Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Boosters found

View related parts
2006 Chrysler 300 Brake Booster Part Number: 5139152AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster; Booster Power Brake
- Item Weight: 8.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139152AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler 300 Submodels:
- Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2006 Chrysler 300 Brake Booster Part Number: 5139145AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster; Booster Power Brake
- Item Weight: 8.80 Pounds
- Item Dimensions: 11.4 x 10.7 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5139145AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler 300 Submodels:
- Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2006 Chrysler 300 Brake Booster Parts and Q&A

Q: How to Maintain and Fix a Brake Booster on 2006 Chrysler 300?
A: In order to fix the vacuum brake booster, adjust the seat of the driver to the back, make sure that the battery is disconnected and the master cylinder is out. Detach booster push rod, remove mounting nuts and remove booster. Install the new booster and make sure that it is well connected and reassemble parts before testing the brakes.