Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
Base, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS
2006 Chrysler Pacifica Exhaust Pipe Parts and Q&A
Q: How to Service an Exhaust Pipe on 2006 Chrysler Pacifica?
A: Spark plug service should be done by first removing the negative cable from the battery. Take out the fastener holding the left bank manifold to the crossover pipe, then release the lower fastener. After that, detach the crossover pipe support fastener and take the pipe out, tossing away its gaskets. Attach the crossover pipe to the manifold and then put in new gaskets, but hold back on tightening the fasteners at this step. At 41 Nm (30 ft. lb.), torque the crossover support fastener before installing it and tightening it as well. Examine the exhaust system while the car is on to find and repair leaks and ensure it isn't touching the body panels; adjust any contact you discover.