How to Maintain a Rocker Arm Assembly with Camshafts Installed on 2006 Chrysler Sebring?

To service the rocker arm assembly, disconnect the negative battery cable, remove the cylinder head cover and spark plugs, and position the camshaft lobe correctly. Mark cam follower positions if reused. Use Special Tools to remove and inspect rocker arms, lubricate, and reinstall them, followed by reassembling the cylinder head cover and battery cable.

OEM 2006 Chrysler Sebring Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rocker Arms found

View related parts
2006 Chrysler Sebring Rocker Arms Part Number: 4884042AA
Product Specifications
- Other Name: Arm - Valve; Rocker Arm Valve Roller; Rocker Arm Valve
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884042AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, JX, JXi, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chrysler Sebring Rocker Arms Part Number: 4792295AB
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Inlet And Exhaust Valve
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792295AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Chrysler Sebring Rocker Arm Parts and Q&A

Q: How to Maintain a Rocker Arm Assembly with Camshafts Installed on 2006 Chrysler Sebring?
A: To service the rocker arm assembly, disconnect the negative battery cable, remove the cylinder head cover and spark plugs, and position the camshaft lobe correctly. Mark cam follower positions if reused. Use Special Tools to remove and inspect rocker arms, lubricate, and reinstall them, followed by reassembling the cylinder head cover and battery cable.