How to Service and Repair a Rocker Arm Assembly on Chrysler Sebring?

The first thing to do when servicing or repairing the rocker arm assembly is to remove the battery cable, the cover of the cylinder head and the spark plugs. Rotate the engine so that the camshaft lobe on the follower being taken out is placed on its base circle and the piston is lowered to be at least 6.3 mm (0.25 inch) below TDC. To make it easier to reuse your cam follower assemblies, note where each is placed. Take advantage of Special Tools 8215-A and 8436 to slowly lower the valve assembly and pull out each rocker arm after that. Check the rocker arms for any issues and change them out according to the need. Use clean oil to gently lubricate the rocker arms and use Special Tools 8215-A and 8436 to work the assembly up and down so the rocker goes onto the hydraulic lifter and the valve stem. After that, fit the spark plugs, remove the cylinder head cover and reattach the negative battery cable.

How to Maintain a Rocker Arm Assembly with Camshafts Installed on Chrysler Sebring?

Before servicing the rocker arm assembly inside the vehicle with camshafts, first take off the negative battery cable and uncover the cylinder head and remove the spark plugs. Twist the engine clockwise until the camshaft lobe on the follower being removed is at its base, with the piston not over 6.3 mm (0.25 inch) from TDC. If you intend to use the cam followers again, clearly mark the positions of each assembly. Pushing down gently on the valve assembly with Special Tools 8215-A and 8436, carefully remove one rocker arm and follow the same procedure for each rocker arm. Check the rocker arms to see if there are any issues and replace them as you find it necessary. When installing, first rub engine oil onto the rocker arm and use Tools 8215-A and 8436 to slowly press down the valve assembly and set the rocker arm on the hydraulic lifter and valve stem for every rocker arm. After that, slide the spark plugs back in, put the cylinder head cover in its place and connect the negative battery cable.

OEM Chrysler Sebring Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Rocker Arms found

View related parts
Chrysler Sebring Exhaust Rocker Arms Part Number: 4663996
$73.76 MSRP: $113.00
You Save: $39.24 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Rocker Arm Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Intake Rocker Arm Part Number: 4573460
$44.50 MSRP: $90.25
You Save: $45.75 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Exhaust Rocker Arms; Arm Assembly, Right Intake Rocker; Rocker Arm Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Intake Rocker Arm Part Number: 4573459
$44.50 MSRP: $90.25
You Save: $45.75 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Exhaust Rocker Arms; Arm Assembly, Left Intake Rocker; Rocker Arm Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Rocker Arms Part Number: MD167981
$14.57 MSRP: $26.80
You Save: $12.23 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Intake Rocker Arm; Arm, Inlet Valve Rocker (Front Valve); Rocker Arm Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chrysler Sebring | Base, JX, JXi, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Rocker Arms Part Number: MD178782
$21.00 MSRP: $42.45
You Save: $21.45 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Exhaust Rocker Arms; Arm, Exhaust Valve Rocker; Rocker Arm Exhaust
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chrysler Sebring | Base, JX, JXi, LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Rocker Arms Part Number: MD167980
$15.94 MSRP: $32.20
You Save: $16.26 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Intake Rocker Arm; Arm, Inlet Valve Rocker (Rear Valve); Rocker Arm Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chrysler Sebring | Base, JX, JXi, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Rocker Arms Part Number: 4884042AA
Product Specifications
- Other Name: Arm - Valve; Rocker Arm Valve Roller; Rocker Arm Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006, 1995-1999 Chrysler Sebring | Base, JX, JXi, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Rocker Arms Part Number: 4792295AB
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Inlet And Exhaust Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Chrysler Sebring Rocker Arm

Choose OEM Rocker Arm that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Rocker Arm follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

If we focus on Chrysler Sebring vehicles, their Rocker Arm is one of the crucial components of a car's valvetrain system which helps to transfer motion from the pushrod towards the intake and exhaust valves. Normally forged in stamped steel or aluminium, the Rocker Arm transmits the alternate upward force on the push rod as the downward force to enable the opening of valves. For high RPM application, the use of aluminum is common due to its light weight benefits while cast iron or forged carbon steel is used in diesel engines for their heavier duty benefits. Roller rockers may be used in Chrysler Sebring models, this type of rocker includes the use of needle bearings to get a rather faster operation than other types of rockers. The rocker ratio in the contemporary engine is adjusted between 1.5:1 and 1.8:1 and the ability to raise the cams lift thereby enhancing the performance. New fulcrum bearings are also used in engines with a high revolution per minute in order to control the stress and enhance the Rocker Arm system's toughness in Chrysler Sebring vehicles.

Chrysler Sebring Rocker Arm Parts and Q&A

Rocker Arms
MD167981
Q: How to Service and Repair a Rocker Arm Assembly on Chrysler Sebring?
A:
The first thing to do when servicing or repairing the rocker arm assembly is to remove the Battery Cable, the cover of the cylinder head and the spark plugs. Rotate the engine so that the Camshaft lobe on the follower being taken out is placed on its base circle and the piston is lowered to be at least 6.3 mm (0.25 inch) below TDC. To make it easier to reuse your cam follower assemblies, note where each is placed. Take advantage of Special Tools 8215-A and 8436 to slowly lower the valve assembly and pull out each rocker arm after that. Check the rocker arms for any issues and change them out according to the need. Use clean oil to gently lubricate the rocker arms and use Special Tools 8215-A and 8436 to work the assembly up and down so the rocker goes onto the hydraulic lifter and the valve stem. After that, fit the spark plugs, remove the cylinder head cover and reattach the negative battery cable.
Rocker Arms
MD178782
Q: How to Maintain a Rocker Arm Assembly with Camshafts Installed on Chrysler Sebring?
A:
Before servicing the rocker arm assembly inside the vehicle with Camshafts, first take off the negative Battery Cable and uncover the cylinder head and remove the spark plugs. Twist the engine clockwise until the camshaft lobe on the follower being removed is at its base, with the Piston not over 6.3 mm (0.25 inch) from TDC. If you intend to use the cam followers again, clearly mark the positions of each assembly. Pushing down gently on the valve assembly with Special Tools 8215-A and 8436, carefully remove one rocker arm and follow the same procedure for each rocker arm. Check the rocker arms to see if there are any issues and replace them as you find it necessary. When installing, first rub engine oil onto the rocker arm and use Tools 8215-A and 8436 to slowly press down the valve assembly and set the rocker arm on the hydraulic lifter and valve stem for every rocker arm. After that, slide the spark plugs back in, put the cylinder head cover in its place and connect the negative battery cable.