How to Maintain a Seat Heater on 2006 Chrysler Sebring?

To repair the heated seat, unplug negative battery cable and take off the seat trim. Unscrew the connector of the damaged heating element and cut the wires and connect the new element. Install the electrical connectors again, reconnect the battery cable, and make sure everything is functioning then replace the trim cover, making sure the wires are placed where they are supposed to.

OEM 2006 Chrysler Sebring Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
2006 Chrysler Sebring Seat Back Heater, Front Upper Part Number: 5000018AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater Pad, Front Upper; Pad Heater Seat Back; Seat Heater
- Position: Front Upper
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000018AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Sebring Submodels:
- Base, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2006 Chrysler Sebring Seat Cushion Heater, Front Lower Part Number: 5000017AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater Pad, Front Lower; Pad Heater Cushion; Seat Heater
- Position: Front Lower
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000017AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Sebring Submodels:
- Base, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2006 Chrysler Sebring Seat Heater Parts and Q&A

Q: How to Maintain a Seat Heater on 2006 Chrysler Sebring?
A: To repair the heated seat, unplug negative battery cable and take off the seat trim. Unscrew the connector of the damaged heating element and cut the wires and connect the new element. Install the electrical connectors again, reconnect the battery cable, and make sure everything is functioning then replace the trim cover, making sure the wires are placed where they are supposed to.