How to service an Oil Pressure Switch on 2006 Chrysler Town & Country?

In order to service the oil pressure sender, the vehicle must be raised, the electrical connector unplugged and the switch removed. Connect the new switch, torque to 23 Nm, reconnect the electrical connector, lower the vehicle, start the engine, check for leaks, and check and adjust the engine oil level if required.

OEM 2006 Chrysler Town & Country Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2006 Chrysler Town & Country Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, SX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2006 Chrysler Town & Country Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2006 Chrysler Town & Country?
A: In order to service the oil pressure sender, the vehicle must be raised, the electrical connector unplugged and the switch removed. Connect the new switch, torque to 23 Nm, reconnect the electrical connector, lower the vehicle, start the engine, check for leaks, and check and adjust the engine oil level if required.