Other Name: Sensor - Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor; Sensor Air Bag
Position: Front
Replaces: 4896023AA, 4686957AC
Item Weight: 0.50 Pounds
Item Dimensions: 3.8 x 2.5 x 1.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4896059AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Chrysler Town & Country Submodels:
Base, EX, LX, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
2006 Chrysler Town & Country Air Bag Sensor Parts and Q&A
Q: How to Service and Repair an Air Bag Sensor Mounted on the Quarter Panel on 2006 Chrysler Town & Country?
A: Start by opening the hood and unattaching one end of the negative battery cable, giving two minutes for the system's back up power to discharge, so you do not get hurt. Take off the quarter trim panel on the part of the vehicle that has the sensor is being removed. After that, open the two retaining screws, unconnect the electrical connector and remove the sensor from your vehicle. Attach the sensor in the car, link the electrical cable, use two retaining screws to secure it and tighten them to 7 N.m (62 in. lbs.). After reinstalling the quarter trim panel, keep the battery negative cable disconnected until you perform the system test, to prevent possible injury or death. Make sure all the systems operate properly and the vehicle runs smooth before leaving the hood open.