How to Service and Repair an Axle Shaft on 2006 Dodge Durango?

Before dealing with the axle shaft, lift the car on a hoist while it's in the neutral position. Take out the caliper, rotor and brake caliper adapter, then get rid of the wheel speed sensors. After that, take off the differential housing cover and draw out the lubricant. Turn the differential case over to reach the lock screw on pinion mate shaft (4), remove screw (4) and then take out pinion mate shaft (1). Press inward on the axle shaft to lift out the C-lock and then remove the axle shaft. Before fitting the bearing, grease up the inside and seal edges of the bearing housing. Insert the axle shaft (1) into the seal (2), sliding it so it engages the side gear teeth that are between the two halves. Slide the C-lock onto the aft end of your axle shaft, then nudge it outward until it fits in the side gear. Slip the pinion shaft into the rear of the differential using its thrust washers and pinions and line up the shaft hole with the case hole, then apply Loctite on the lock screw (4) and tighten it to 25 Nm (220 inch lbs.). You only need to install the differential cover, fill it with gear oil, set in the brake rotor and caliper adapter with caliper and then place the wheel speed sensors.

OEM 2006 Dodge Durango Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Axle Shafts found

View related parts
2006 Dodge Durango Intermediate Shaft, Front Driver Side Part Number: 52069887AE
$173.94 MSRP: $259.00
You Save: $85.06 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle Intermediate; Drive Axle Shaft, Front Left; CV Intermediate Shaft; Axle Shafts; Axle Housing; Intermed Shaft; Shaft Axle Intermediate; Shaft Axle; Axle Shaft
- Position: Front Driver Side
- Replaces: 52069887AD
- Item Weight: 2.50 Pounds
- Item Dimensions: 1.7 x 5.2 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52069887AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Axle Shafts, Front Passenger Side Part Number: 52069886AE
$287.78 MSRP: $429.00
You Save: $141.22 (33%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Axle Intermediate; Drive Axle Shaft, Front Right; CV Intermediate Shaft; Intermed Shaft; Shaft Axle Intermediate; Shaft Axle; Axle Shaft
- Position: Front Passenger Side
- Replaces: 52069886AD
- Item Weight: 7.00 Pounds
- Item Dimensions: 24.0 x 5.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52069886AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Axle Shaft, Rear Passenger Side Part Number: 52111372AD
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Right; Axle Seal; Axle Shafts
- Position: Rear Passenger Side
- Replaces: 52111372AB, 52111372AC, 52099398AB, 52099398AC
- Item Weight: 28.90 Pounds
- Item Dimensions: 40.6 x 12.4 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111372AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Axle Shaft Assembly, Front Driver Side Part Number: 52114390AB
$626.22 MSRP: $915.00
You Save: $288.78 (32%)
Product Specifications
- Other Name: Shaft - Axle Half; CV Axle Assembly, Front Left, Front Right; Constant Velocity Axle; Axle Shaft; Axle Assembly; Shaft Axle Half; CV Axle Assembly
- Position: Front Driver Side
- Replaces: 52114390AA
- Item Weight: 17.80 Pounds
- Item Dimensions: 23.7 x 5.2 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52114390AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Axle Assembly, Rear Part Number: 5102074AF
Product Specifications
- Other Name: Axle - Service Rear; Drive Axle Assembly, Rear; Axle Shaft
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102074AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Axle Shaft, Rear Driver Side Part Number: 52111373AD
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left; Axle Seal; Axle Shafts
- Position: Rear Driver Side
- Replaces: 52099399AC, 52099399AB, 52111373AC, 52111373AB
- Item Weight: 29.00 Pounds
- Item Dimensions: 39.4 x 11.7 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111373AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Axle Shaft, Rear Passenger Side Part Number: 52111370AD
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Right; Axle Shafts
- Position: Rear Passenger Side
- Replaces: 52111370AC, 52111370AB
- Item Weight: 26.90 Pounds
- Item Dimensions: 42.4 x 11.3 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111370AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Axle Shaft, Rear Driver Side Part Number: 52111371AD
Product Specifications
- Other Name: Shaft - Axle Rear; Drive Axle Shaft, Rear Left; Axle Shafts
- Position: Rear Driver Side
- Replaces: 52111371AC, 52111371AB
- Item Weight: 28.40 Pounds
- Item Dimensions: 41.3 x 12.1 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111371AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Axle Assembly, Rear Part Number: 5102071AF
Product Specifications
- Other Name: Axle - Service Rear; Drive Axle Assembly, Rear; Axle Shaft
- Position: Rear
- Replaces: 5102071AD, 5102071AE
- Item Weight: 203.80 Pounds
- Item Dimensions: 70.8 x 23.6 x 21.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102071AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Durango Axle Assembly, Rear Part Number: 5102029AF
Product Specifications
- Other Name: Axle - Service Rear; Drive Axle Assembly, Rear; Axle Shaft
- Position: Rear
- Replaces: 5102029AE, 5102029AD
- Item Weight: 188.60 Pounds
- Item Dimensions: 72.2 x 23.3 x 21.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102029AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Dodge Durango Axle Shaft Parts and Q&A

Q: How to Service and Repair an Axle Shaft on 2006 Dodge Durango?
A: Before dealing with the axle shaft, lift the car on a hoist while it's in the neutral position. Take out the caliper, rotor and brake caliper adapter, then get rid of the wheel speed sensors. After that, take off the differential housing cover and draw out the lubricant. Turn the differential case over to reach the lock screw on pinion mate shaft (4), remove screw (4) and then take out pinion mate shaft (1). Press inward on the axle shaft to lift out the C-lock and then remove the axle shaft. Before fitting the bearing, grease up the inside and seal edges of the bearing housing. Insert the axle shaft (1) into the seal (2), sliding it so it engages the side gear teeth that are between the two halves. Slide the C-lock onto the aft end of your axle shaft, then nudge it outward until it fits in the side gear. Slip the pinion shaft into the rear of the differential using its thrust washers and pinions and line up the shaft hole with the case hole, then apply Loctite on the lock screw (4) and tighten it to 25 Nm (220 inch lbs.). You only need to install the differential cover, fill it with gear oil, set in the brake rotor and caliper adapter with caliper and then place the wheel speed sensors.