Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Right; Retractor Assembly; Seat Belt Front Outer
Position: Front Outer Passenger Side
Item Weight: 2.80 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: UX521DVAE
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Magnum Submodels:
R/T, SE, SRT8, SXT, SXT Special Edition | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
2006 Dodge Magnum Seat Belt Parts and Q&A
Q: How to Maintain the Rear Seat Belt and Retractor in a Wagon on 2006 Dodge Magnum?
A: The first step to servicing the rear seat belt and retractor in the wagon is to take out the bolt under the lower seat belt anchor. After that, set the quarter trim panel aside and unfasten the nut at the back of the seat belt retractor. During installation, insert the indexing tab of the retractor into its slot at the rear, then tighten the retaining nut to 34 N.m (25 ft. lbs.). Attach the quarter trim panel and tighten down the lower seat belt anchor bolt to 32 N.m (24 ft. lbs.). To change the center rear seat belt, remove the trim cover beside the left seat, release the cable between the upper seat back and the frame and unbolt the seat belt retractor. Start by fitting the rear center retractor against the seat back, close it with the bolt, tighten it to 34 N.m (25 ft. lbs.) and reattach the left seat back cover.