How to Service and Repair a Drive Shaft for Rear HD on 2006 Dodge Ram 1500?

Lift the car on a hoist while the transmission is in neutral. Put a mark on the propeller shaft, pinion flange and propeller shaft flange at the time of installation. Mark the positions of the manual transmission flange and propeller shaft flange for any vehicles having a manual transmission. If your engine has a center bearing, sketch its place on the center bearing bracket to help yourself, then hold up the shaft and unbolt the center bearing. When that is done, come out of the gearbox and remove the bolts securing the pinion flange to the propeller shaft, then pull the propeller shaft off the output shaft and mark them both for when you put them back together. On a manual transmission car, release all the flange bolts. The next step is to get the propeller shaft loose and out of the car. While installing, place the slip yoke onto the shaft coming from the transmission/transfer case and ensure the marks are matched up. On manual transmission, place the propeller shaft in the same way, align the marks, insert the bolts and tighten them to 115 Nm (85 ft. lbs.). When the propeller has two sections, place the center bearing matching the reference marks and tighten all the bolts to 40 ft.-lb. or 54 Nm. After that, put together the reference marks on the propeller shaft and pinion flange, set in fresh companion flange bolts and tighten them to 115 Nm (85 ft. lbs.).

OEM 2006 Dodge Ram 1500 Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Drive Shafts found

View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52123021AC
$1036.23 MSRP: $1525.00
You Save: $488.77 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Front
- Replaces: 52123021AB, 52123021AA, 52105990AB
- Item Weight: 16.00 Pounds
- Item Dimensions: 39.8 x 6.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52123021AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX, TRX4 | 10 Cyl 8.3 L GAS, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52853163AA
$31.72 MSRP: $40.21
You Save: $8.49 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Package - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Item Weight: 49.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853163AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52105744AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece; Shaft Drive
- Item Weight: 30.00 Pounds
- Item Dimensions: 79.3 x 16.8 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105744AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4, WS | 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52105926AB
Product Specifications
- Other Name: Shaft Package - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Item Weight: 22.60 Pounds
- Item Dimensions: 65.1 x 4.4 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105926AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52105916AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Item Weight: 42.30 Pounds
- Item Dimensions: 91.6 x 9.1 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105916AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52105924AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Replaces: 52105924AD, 52105924AC, 52105924AE
- Item Weight: 20.90 Pounds
- Item Dimensions: 4.9 x 5.0 x 84.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105924AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52123100AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52105810AF, 52123100AA
- Item Weight: 79.40 Pounds
- Item Dimensions: 88.9 x 9.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52123100AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52123110AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123110AB, 52105930AC, 52105930AE, 52105930AF, 52105930AD, 52105930AB, 52123110AA
- Item Weight: 26.80 Pounds
- Item Dimensions: 5.2 x 5.2 x 33.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52123110AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52853161AB
Product Specifications
- Other Name: Shaft Package - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Item Weight: 29.70 Pounds
- Item Dimensions: 79.6 x 4.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853161AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52853314AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Item Weight: 5.10 Pounds
- Item Dimensions: 93.3 x 8.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853314AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52853313AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Item Weight: 28.50 Pounds
- Item Dimensions: 73.8 x 5.4 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52853162AA
Product Specifications
- Other Name: Shaft Package - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52853162AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52123014AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Item Weight: 44.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52123014AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52123012AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Item Weight: 23.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52123012AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52105923AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Item Weight: 46.00 Pounds
- Item Dimensions: 109.3 x 7.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105923AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52105919AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Item Weight: 22.50 Pounds
- Item Dimensions: 56.2 x 4.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105919AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 5037625AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Item Weight: 46.80 Pounds
- Item Dimensions: 92.5 x 9.1 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037625AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- SRT-10 | 10 Cyl 8.3 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 5037624AA
Product Specifications
- Other Name: Shaft Package - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037624AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 1500 Submodels:
- SRT-10 | 10 Cyl 8.3 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52105918AA
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 1-Piece
- Item Weight: 30.60 Pounds
- Item Dimensions: 79.4 x 4.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52105918AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 1500 Drive Shaft Part Number: 52123132AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123132AA, 52105634AF
- Item Weight: 71.40 Pounds
- Item Dimensions: 89.8 x 9.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52123132AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, ST, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Dodge Ram 1500 Drive Shaft Parts and Q&A

Q: How to Service and Repair a Drive Shaft for Rear HD on 2006 Dodge Ram 1500?
A: Lift the car on a hoist while the transmission is in neutral. Put a mark on the propeller shaft, pinion flange and propeller shaft flange at the time of installation. Mark the positions of the manual transmission flange and propeller shaft flange for any vehicles having a manual transmission. If your engine has a center bearing, sketch its place on the center bearing bracket to help yourself, then hold up the shaft and unbolt the center bearing. When that is done, come out of the gearbox and remove the bolts securing the pinion flange to the propeller shaft, then pull the propeller shaft off the output shaft and mark them both for when you put them back together. On a manual transmission car, release all the flange bolts. The next step is to get the propeller shaft loose and out of the car. While installing, place the slip yoke onto the shaft coming from the transmission/transfer case and ensure the marks are matched up. On manual transmission, place the propeller shaft in the same way, align the marks, insert the bolts and tighten them to 115 Nm (85 ft. lbs.). When the propeller has two sections, place the center bearing matching the reference marks and tighten all the bolts to 40 ft.-lb. or 54 Nm. After that, put together the reference marks on the propeller shaft and pinion flange, set in fresh companion flange bolts and tighten them to 115 Nm (85 ft. lbs.).