Other Name: Insulator - Engine Mount; Engine Mount Bracket, Right; Engine Mount, Right; Engine Mount Torque Strut; Engine Support; Mount Bracket; Front Mount; Mount Insulator; Mount; Insulator Engine Mount; Engine Mount Bracket
Position: Passenger Side
Replaces: 52121506AB, 52121530AB
Item Weight: 6.30 Pounds
Item Dimensions: 4.6 x 5.4 x 7.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52122710AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4 | 5.7L V8, 8 Cyl 5.7 L GAS
Other Name: Bracket - Engine Mount; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Front Mount; Mount Insulator; Insulator Engine Mount
Replaces: 52021713AA
Item Weight: 2.60 Pounds
Item Dimensions: 3.4 x 4.1 x 6.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52021713AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 8 Cyl 5.7 L GAS
Other Name: Bracket - Engine Mount; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Mount Insulator; Insulator Engine Mount
Replaces: 52122714AA
Item Weight: 2.70 Pounds
Item Dimensions: 3.5 x 3.9 x 6.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52122714AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Other Name: Bracket - Engine Mount; Left Engine Mount; Torque Strut; Motor Mount; Mount Bracket; Front Mount; Mount Insulator; Insulator Engine Mount; Engine Mount Bracket
Position: Driver Side
Item Weight: 7.30 Pounds
Item Dimensions: 6.0 x 7.0 x 7.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52121507AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS
Other Name: Bracket - Engine Mount; Left Engine Mount; Torque Strut; Motor Mount; Front Mount; Mount Insulator; Insulator Engine Mount; Engine Mount Bracket
Position: Driver Side
Replaces: 52121505AB
Item Weight: 9.00 Pounds
Item Dimensions: 8.2 x 6.0 x 4.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52121505AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 8 Cyl 5.7 L GAS
Q: How to Service and Repair a Rear Engine Mount on 2006 Dodge Ram 2500?
A: Before servicing the rear engine mount, raise the vehicle and put a jack underneath the transmission. Pull the nuts out of the transmission mount and take out the two bolts that link the transmission mount to the engine bracket. Elevate the transmission enough to remove the mount from the crossmember and then remove the mount. Put threadlocking compound on the transmission bolts, then tighten both of them to 61 Nm (45 ft. lbs.). Set the transmission upward slightly, letting the mount's underside touch the crossmember and ensure the transmission holes fit into the crossmember's holes. Insert the nuts onto the studs in the transmission mounts and tighten them with 54 Nm (40 ft. lbs.).