How to Service and Repair a Steering Knuckle on a (HD) 4X2 on 2006 Dodge Ram 2500?

To fix or repair the steering knuckle on such a vehicle, first get it on the lift, then take off the wheel and tire. from there, remove the brakes caliper, rotor, shield and ABS wheel speed sensor if it exists. Remove the nut from the tie rod end and use Remover 9360 to split the tie rod from the knuckle. Next, remove the upper ball joint nut and split the ball joint from the knuckle using Remover 9360, so you do not damage the seal at the time of installing puller 8677. Go on to take off the lower ball joint nut, pull the ball joint from the knuckle using puller 8677 and remove the knuckle. Take out the hub/bearing unit from the steering knuckle in the end.

OEM 2006 Dodge Ram 2500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2006 Dodge Ram 2500 Knuckle, Front Passenger Side Part Number: 5086678AA
$398.90 MSRP: $896.00
You Save: $497.10 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 21.40 Pounds
- Item Dimensions: 14.7 x 14.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Knuckle, Front Driver Side Part Number: 5086679AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 21.00 Pounds
- Item Dimensions: 14.8 x 12.2 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086679AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 2500 Knuckle, Front Passenger Side Part Number: 52106790AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right
- Position: Front Passenger Side
- Replaces: 52106790AB
- Item Weight: 20.00 Pounds
- Item Dimensions: 17.3 x 14.0 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106790AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
2006 Dodge Ram 2500 Knuckle, Front Driver Side Part Number: 52106791AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left
- Position: Front Driver Side
- Replaces: 52106791AB
- Item Weight: 28.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106791AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10

2006 Dodge Ram 2500 Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on a (HD) 4X2 on 2006 Dodge Ram 2500?
A: To fix or repair the steering knuckle on such a vehicle, first get it on the lift, then take off the wheel and tire. from there, remove the brakes caliper, rotor, shield and ABS wheel speed sensor if it exists. Remove the nut from the tie rod end and use Remover 9360 to split the tie rod from the knuckle. Next, remove the upper ball joint nut and split the ball joint from the knuckle using Remover 9360, so you do not damage the seal at the time of installing puller 8677. Go on to take off the lower ball joint nut, pull the ball joint from the knuckle using puller 8677 and remove the knuckle. Take out the hub/bearing unit from the steering knuckle in the end.