How to Service and Repair a Steering Knuckle on an (HD) 4X2 on 2007 Dodge Ram 2500?

Start service and repair of the steering knuckle on a (HD) 4X2 by raising and supporting the vehicle, then taking off the wheel and tire assembly. Remove the rotor, brake caliper, shield and the ABS wheel speed sensor from the setup next if it has one. Open the nut on the tie rod end and apply Remover 9360 to help you separate the tie rod from the knuckle. After taking out the nut, use Remover 9360 to part the ball joint from the knuckle, but take care to not harm the seal while using puller 8677. With the rest of the ball joint removed, take out the lower ball joint nut, disconnect the ball joint from the knuckle using puller 8677 and remove the knuckle. On top of that, remove the hub/bearing from the steering knuckle.

OEM 2007 Dodge Ram 2500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2007 Dodge Ram 2500 Knuckle, Front Passenger Side Part Number: 5086678AA
$398.90 MSRP: $896.00
You Save: $497.10 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 21.40 Pounds
- Item Dimensions: 14.7 x 14.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Ram 2500 Knuckle, Front Driver Side Part Number: 5086679AA
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 21.00 Pounds
- Item Dimensions: 14.8 x 12.2 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086679AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Ram 2500 Knuckle, Front Passenger Side Part Number: 52106790AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right
- Position: Front Passenger Side
- Replaces: 52106790AB
- Item Weight: 20.00 Pounds
- Item Dimensions: 17.3 x 14.0 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106790AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10
View related parts
2007 Dodge Ram 2500 Knuckle, Front Driver Side Part Number: 52106791AD
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left
- Position: Front Driver Side
- Replaces: 52106791AB
- Item Weight: 28.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106791AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS, 8.0L V10

2007 Dodge Ram 2500 Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on an (HD) 4X2 on 2007 Dodge Ram 2500?
A: Start service and repair of the steering knuckle on a (HD) 4X2 by raising and supporting the vehicle, then taking off the wheel and tire assembly. Remove the rotor, brake caliper, shield and the ABS wheel speed sensor from the setup next if it has one. Open the nut on the tie rod end and apply Remover 9360 to help you separate the tie rod from the knuckle. After taking out the nut, use Remover 9360 to part the ball joint from the knuckle, but take care to not harm the seal while using puller 8677. With the rest of the ball joint removed, take out the lower ball joint nut, disconnect the ball joint from the knuckle using puller 8677 and remove the knuckle. On top of that, remove the hub/bearing from the steering knuckle.