How to Maintain a Speed Sensor for Optimal Performance on 2006 Dodge Ram 3500?

For transmission speed sensor maintenance, place the catch pan under the transmission and raise the car before you begin. Take the wiring connector away from output speed sensor 1, then remove the bolt that holds the sensor onto the transmission case and pull the sensor out. To install, reinsert the output speed sensor 1 into the transmission case, secure it with the bolt and tighten the bolt according to the guide, using 12 Nm (105 inch lbs.) (This may vary as recommended in the guide). Attach the wiring connector back to output speed sensor 1, review the transmission fluid level and add more if it's needed and then lower the vehicle.

OEM 2006 Dodge Ram 3500 Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2006 Dodge Ram 3500 Vehicle Speed Sensor Part Number: 4799061AB
$42.22 MSRP: $60.70
You Save: $18.48 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Input Speed; Automatic Transmission Speed Sensor; Speedometer Sensor; Used for input and output in transmission speed sensing.
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4799061AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 3500 Speed Sensor Part Number: 4800879
Product Specifications
- Other Name: Sensor - Transmission Output Speed; Vehicle Speed Sensor; Speedometer Sensor; Input Sensor; Output Sensor; Sensor; Sensor Transmission Output Speed
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 1.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4800879
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
- Base, Laramie, SLT, ST, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2006 Dodge Ram 3500 Speed Sensor, Rear Part Number: 5032220AC
Product Specifications
- Other Name: Sensor - Wheel Speed; Rear ABS Wheel Speed Sensor; Anti-Lock Braking System.; Rear Speed Sensor
- Position: Rear
- Replaced by: 5032220AD
- Replaces: 5032220AA, 5032220AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 3.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5032220AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2006 Dodge Ram 3500 Sensor - Wheel Speed Part Number: 5032220AD
Product Specifications
- Other Name: SENSOR-WHEEL SPEED
- SKU: 5032220AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 6.7L L6, 8 Cyl 5.7 L GAS

2006 Dodge Ram 3500 Speed Sensor Parts and Q&A

Q: How to Maintain a Speed Sensor for Optimal Performance on 2006 Dodge Ram 3500?
A: For transmission speed sensor maintenance, place the catch pan under the transmission and raise the car before you begin. Take the wiring connector away from output speed sensor 1, then remove the bolt that holds the sensor onto the transmission case and pull the sensor out. To install, reinsert the output speed sensor 1 into the transmission case, secure it with the bolt and tighten the bolt according to the guide, using 12 Nm (105 inch lbs.) (This may vary as recommended in the guide). Attach the wiring connector back to output speed sensor 1, review the transmission fluid level and add more if it's needed and then lower the vehicle.