How to Service an Axle Shaft Seal on 2006 Jeep Commander?

Before servicing the axle shaft seals, lift the vehicle on a hoist and put it in neutral. Take the calipers and rotors off first and next remove the speed sensors (2) from the axle tube (1) flange. Then, after removing the nuts from the axle, pull out the axle shaft and backing plate from the tube, until the axle bearing shows. Get rid of the O-ring (2) from the axle bearing and after that take out the axle shaft (1) from the axle tube and the backing plate. First, put the new O-ring on the axle, followed by placing the axle shaft (1) into the axle tube and then install it on the backing plate. Put O-ring (2) through the backing plate and push the axle through until the bearing (1) shows, then attach a new O-ring (2) to the axle bearing (1). Bury the axle through the center tube and tighten the axle flange nuts (1) to 119 Nm (88 ft. lbs.). Place the two speed sensors into the axle tube flange and then set in the calipers and rotors.

OEM 2006 Jeep Commander Axle Shaft Seal

CV Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Axle Shaft Seals found

View related parts
2006 Jeep Commander Axle Seal, Front Driver Side Part Number: 52069706AB
$19.07 MSRP: $28.00
You Save: $8.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Axle Drive Shaft; Front Right/Left Drive Axle Shaft Seal; CV Intermediate Shaft Seal; Oil Seal Set; Bearing Seal; Axle Seals; Axle Shaft Seal; Intermed Shaft Seal; Ring; Seal; Seal Axle Drive Shaft; Drive Axle Shaft Seal
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.9 x 2.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52069706AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Axle Seal, Front Driver Side Part Number: 52111338AC
$33.86 MSRP: $50.50
You Save: $16.64 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Axle Drive Shaft; Drive Axle Shaft Seal, Front Left; Seal Axle Drive Shaft; Drive Axle Shaft Seal; Axle Shaft Seal
- Position: Front Driver Side
- Replaces: 52111338AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 3.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52111338AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Output Shaft Seal Part Number: 5143715AA
$35.66 MSRP: $52.85
You Save: $17.19 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Automatic Transmission Output Shaft Seal; Transfer Case Output Shaft Seal; Axle Seal.; Seal Output
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.8 x 3.4 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5143715AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Axle Shaft Seal Parts and Q&A

Q: How to Service an Axle Shaft Seal on 2006 Jeep Commander?
A: Before servicing the axle shaft seals, lift the vehicle on a hoist and put it in neutral. Take the calipers and rotors off first and next remove the speed sensors (2) from the axle tube (1) flange. Then, after removing the nuts from the axle, pull out the axle shaft and backing plate from the tube, until the axle bearing shows. Get rid of the O-ring (2) from the axle bearing and after that take out the axle shaft (1) from the axle tube and the backing plate. First, put the new O-ring on the axle, followed by placing the axle shaft (1) into the axle tube and then install it on the backing plate. Put O-ring (2) through the backing plate and push the axle through until the bearing (1) shows, then attach a new O-ring (2) to the axle bearing (1). Bury the axle through the center tube and tighten the axle flange nuts (1) to 119 Nm (88 ft. lbs.). Place the two speed sensors into the axle tube flange and then set in the calipers and rotors.