How to remove an axle shaft seal on Jeep Commander?

Begin by engaging the ignition key and setting the transmission into neutral. First, detach both the calipers and rotors and then proceed to pull the two speed sensors from the axle tube flange. Subsequently, remove the axle flange nuts. Delicately draw the axle shaft and backing plate from the axle tube toward you until the axle bearing is uncovered. First pull the O-ring from the axle bearing and then slide the axle shaft out of the axle tube and backing plate.

How to install an axle shaft seal on Jeep Commander?

Tighten all the bearing flange studs to around 27 Nm (20 ft. lb.) before putting in the axle shaft seal. Put the axle shaft into the axle tube and backing plate, then attach a new O-ring to the axle first. Put the O-ring through the backing plate and push the axle inside until the bearing can be seen. After that, put a new O-ring onto the end of the axle bearing. Push the axle deeply into the tube and screw on the axle flange nuts, torquing them to 119 Nm or 88 ft. lbs. After that, attach the speed sensors to the flange of the axle tube and wrap up the process by bolting the calipers and rotors.

OEM Jeep Commander Axle Shaft Seal

CV Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Axle Shaft Seals found

View related parts
Jeep Commander Axle Seal, Front Driver Side Part Number: 52069706AB
$19.07 MSRP: $28.00
You Save: $8.93 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Axle Drive Shaft; Front Right/Left Drive Axle Shaft Seal; CV Intermediate Shaft Seal; Oil Seal Set; Bearing Seal; Axle Seals; Axle Shaft Seal; Intermed Shaft Seal; Ring; Seal; Seal Axle Drive Shaft; Drive Axle Shaft Seal
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Axle Seal, Front Driver Side Part Number: 52111338AC
$33.86 MSRP: $50.50
You Save: $16.64 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Axle Drive Shaft; Drive Axle Shaft Seal, Front Left; Seal Axle Drive Shaft; Drive Axle Shaft Seal; Axle Shaft Seal
- Position: Front Driver Side
- Replaces: 52111338AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Output Shaft Seal Part Number: 5143715AA
$35.66 MSRP: $52.85
You Save: $17.19 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Automatic Transmission Output Shaft Seal; Transfer Case Output Shaft Seal; Axle Seal.; Seal Output
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2009 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Axle Shaft Seal

Choose OEM Axle Shaft Seal that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Axle Shaft Seal follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Axle Shaft Seal is a part that has received a lot of attention mostly due to its efficiency and functionality in the entire Jeep Commander car. This Axle Shaft Seal helps stop the outflow of critical lubricants like; transmission fluid and differential oil, by blocking the gap in-between the CV axle and the transmission or rear differential. This makes it possible to contain the vital fluids hence protecting the performance as well as life of the car. Applicable for Jeep Commander XK or 2022 Jeep Meridian, this Axle Shaft Seal is designed to preserve the condition of the fluid regardless of the engines are V6 or V8 type. This has made the Axle Shaft Seal very important because it guards against such mishaps that result from loss of fluids, thus avoiding expenses such as paying for new axle shafts, and general endangerment of other users on the roads. Moreover, the Axle Shaft Seal is unique in the automotive market because of its excellent sealing and high-quality features; therefore, Jeep Commanders can navigate various conditions with confidence. As it increases the vehicle efficiency and reliability the Axle Shaft Seal keeps people loyal to the Jeep brand assuring that every drive will be safe and enjoyable.

Jeep Commander Axle Shaft Seal Parts and Q&A

Output Shaft Seal
5143715AA
Q: How to remove an axle shaft seal on Jeep Commander?
A:
Begin by engaging the ignition key and setting the transmission into neutral. First, detach both the calipers and rotors and then proceed to pull the two Speed Sensors from the axle tube flange. Subsequently, remove the axle flange nuts. Delicately draw the Axle Shaft and backing plate from the axle tube toward you until the axle bearing is uncovered. First pull the O-ring from the axle bearing and then slide the axle shaft out of the axle tube and backing plate.
Axle Seal, Front Driver Side
52069706AB
Q: How to install an axle shaft seal on Jeep Commander?
A:
Tighten all the bearing flange studs to around 27 Nm (20 ft. lb.) before putting in the Axle Shaft seal. Put the axle shaft into the axle tube and backing plate, then attach a new O-ring to the axle first. Put the O-ring through the backing plate and push the axle inside until the bearing can be seen. After that, put a new O-ring onto the end of the axle bearing. Push the axle deeply into the tube and screw on the axle flange nuts, torquing them to 119 Nm or 88 ft. lbs. After that, attach the Speed Sensors to the flange of the axle tube and wrap up the process by bolting the calipers and rotors.