How to Remove and Install a Fuel Level Sensor from the Fuel Pump Module on 2006 Jeep Commander?

In order to install a new fuel level sending unit, remove the fuel pump module out of the tank and remove the electrical connector, and keep note of the pin positions. Disconnect the sending unit attaching the locking tab. Reconnect wiring, install sending unit, and install again fuel pump module.

OEM 2006 Jeep Commander Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
2006 Jeep Commander Fuel Gauge Sending Unit Part Number: 68027669AD
$147.90 MSRP: $220.00
You Save: $72.10 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Level Unit - Fuel; Fuel Level Sensor; Level Indicator
- Replaces: 68027669AA, 68027669AB, 5143578AA, 5143578AB, 68027669AC
- Item Weight: 5.20 Pounds
- Item Dimensions: 13.4 x 8.5 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68027669AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2006 Jeep Commander Fuel Pump Gasket Part Number: 68304753AA
$32.23 MSRP: $47.75
You Save: $15.52 (33%)
ADD TO CART
Product Specifications
- Other Name: O Ring - Fuel Pump And Level Unit; Fuel Pump Tank Seal; Fuel Pump Seal; Fuel Pump Assembly Seal; Gasket Fuel Pump
- Replaces: 57009306AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.2 x 6.3 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68304753AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2006 Jeep Commander Fuel Level Sensor Parts and Q&A

Q: How to Remove and Install a Fuel Level Sensor from the Fuel Pump Module on 2006 Jeep Commander?
A: In order to install a new fuel level sending unit, remove the fuel pump module out of the tank and remove the electrical connector, and keep note of the pin positions. Disconnect the sending unit attaching the locking tab. Reconnect wiring, install sending unit, and install again fuel pump module.