How to Remove and Install a Fuel Level Sensor from the Fuel Pump Module on Jeep Commander?

This unit and assembly are found positioned on the fuel pump module's side. Steps should begin with unbolting the fuel pump module from the tank. Before making this separation, make a note of each pin's place in the harness, undo the connector cord and then, using a terminal pick/removal tool, pull out the sending unit wiring. For this step, carefully slide the bottom edge of the sending unit down as you lift the plastic locking tab using a small pick or screwdriver. For installation, line up the previously marked wire connections with those in the copper connectors and in the pump module. Slide the sending unit along the mounting tracks to the pump module and snap it in, then put back the pump unit in place.

How to Locate and Detach the Fuel Level Sensor from the Fuel Pump Module on Jeep Commander?

You will find the fuel level sensor and the float assembly matched together on the side of the fuel pump. Take out the fuel pump module first from the fuel tank. Disconnect the electrical plug from the fuel pump module, be sure to mark where each pin is first and then unbind the related fuel level sensor wiring from the connector with a terminal pick/removal tool. To pull the fuel level sensor away from the pump module, hold the plastic locking piece with a small pick or screwdriver, then slide down the fuel level sensor down the mounting track.

OEM Jeep Commander Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
Jeep Commander Fuel Gauge Sending Unit Part Number: 68027669AD
$147.90 MSRP: $220.00
You Save: $72.10 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Level Unit - Fuel; Fuel Level Sensor; Level Indicator
- Replaces: 68027669AA, 68027669AB, 5143578AA, 5143578AB, 68027669AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Jeep Commander | 65th Anniversary Edition, Base, Limited | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Commander Fuel Pump Gasket Part Number: 68304753AA
$32.23 MSRP: $47.75
You Save: $15.52 (33%)
ADD TO CART
Product Specifications
- Other Name: O Ring - Fuel Pump And Level Unit; Fuel Pump Tank Seal; Fuel Pump Seal; Fuel Pump Assembly Seal; Gasket Fuel Pump
- Replaces: 57009306AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Jeep Commander | 65th Anniversary Edition, Base, Limited, Overland, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

Jeep Commander Fuel Level Sensor

Choose OEM Fuel Level Sensor that meet Jeep factory standards. Jeep designs and tests every component for precision and durability. Each Fuel Level Sensor follows strict manufacturing steps to lock in quality and fit. If your Jeep Commander matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Commander parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Fuel Level Sensor is indeed one of the critical parts of the jeep vehicle manufacturing that reflects supreme quality and performance. This sensor's task is to control the degree of fuel in a tank; it signals the drivers to fill it up when necessary, so the Jeep Commander will work effectively and safely. Due to its solid structure, it can work well at higher temperatures and with low power consumption; thus, it is suitable for many Commander models, including the XK and the 2022 Meridian. The Fuel Level Sensor generally consists of the float, actuating rod and resistor; and accurate feedback is enabled to the fuel gauge and reduces problems like the fake 'Full Tank' signal. This accuracy is important when it comes to managing the Jeep Commander to ensure that it does not experience any surprises concerning fuel. The Fuel Level Sensor can also be seen as an advantage since the electronic design and respective calibration possibilities are designed with regard to the various modifications of Jeep Commander. Also, it is easily integrated into the Jeep composition and has positive impacts on the performance together with the safety aspect which makes it crucial for any Jeep Commander car. The Jeep Commander has already of the product that has been launched and the new design has been enabled to be implemented on the fuel level sensor hence improving on the Jeep brand as it has been offering quality fuel level sensor and enhancing the quality fuel level sensor to the users.

Jeep Commander Fuel Level Sensor Parts and Q&A

Fuel Gauge Sending Unit
68027669AD
Q: How to Remove and Install a Fuel Level Sensor from the Fuel Pump Module on Jeep Commander?
A:
This unit and assembly are found positioned on the Fuel Pump module's side. Steps should begin with unbolting the fuel pump module from the tank. Before making this separation, make a note of each pin's place in the harness, undo the connector cord and then, using a terminal pick/removal tool, pull out the sending unit wiring. For this step, carefully slide the bottom edge of the sending unit down as you lift the plastic locking tab using a small pick or screwdriver. For installation, line up the previously marked wire connections with those in the copper connectors and in the pump module. Slide the sending unit along the mounting tracks to the pump module and snap it in, then put back the pump unit in place.
Fuel Pump Gasket
68304753AA
Q: How to Locate and Detach the Fuel Level Sensor from the Fuel Pump Module on Jeep Commander?
A:
You will find the fuel level sensor and the float assembly matched together on the side of the Fuel Pump. Take out the fuel pump module first from the Fuel Tank. Disconnect the electrical plug from the fuel pump module, be sure to mark where each pin is first and then unbind the related fuel level sensor wiring from the connector with a terminal pick/removal tool. To pull the fuel level sensor away from the pump module, hold the plastic locking piece with a small pick or screwdriver, then slide down the fuel level sensor down the mounting track.