How to Service and Repair a Vapor Canister on 2007 Chrysler 300?

To service the Evaporative Emission Control Canister. Remove the negative battery cable, jack up the vehicle, remove the right rear tire and the inner splash shield. Remove the line of the EVAP, unlock the electrical connector and remove the mounting nut. Slide the assembly forward, disconnect vapor lines and remove canister.

OEM 2007 Chrysler 300 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vapor Canisters found

View related parts
2007 Chrysler 300 Vapor Canister Part Number: 4891761AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Item Weight: 5.10 Pounds
- Item Dimensions: 15.5 x 10.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891761AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler 300 Submodels:
- Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2007 Chrysler 300 Vapor Canister Part Number: 4578366AG
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 4578366AE, 4578366AD, 4578366AC, 4578366AF
- Item Weight: 4.90 Pounds
- Item Dimensions: 15.6 x 10.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578366AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler 300 Submodels:
- Base, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8

2007 Chrysler 300 Vapor Canister Parts and Q&A

Q: How to Service and Repair a Vapor Canister on 2007 Chrysler 300?
A: To service the Evaporative Emission Control Canister. Remove the negative battery cable, jack up the vehicle, remove the right rear tire and the inner splash shield. Remove the line of the EVAP, unlock the electrical connector and remove the mounting nut. Slide the assembly forward, disconnect vapor lines and remove canister.