How to Remove the Vapor Canister on Chrysler 300?

Connecting the negative battery cable after the canister as been removed is the next important step. After that, raise the vehicle and take out the right rear wheel and the splash shield found underneath. After that, unhook the EVAP line and separate the electrical connector from the rest. Undo the nut on the mount and slide the assembly toward the front off the rear brackets. Simply pull the vapor lines off the EVAP canister by squeezing the connectors and checking that you do not lose the rubber mounts while removing them. Afterwards, get rid of the mounting nuts and carefully take the canister out of the bracket.

How to Service and Repair a Vapor Canister on Chrysler 300?

The first step in serving or fixing the Evaporative Emission Control Canister is to disconnect the battery cable and jack up the vehicle. Take out the rear tire on the driver's side and then take off the inner splash shield. Next, disconnect the EVAP line and pull the electrical connector off the pump. Loosen and remove the mounting nut and move the assembly forwards off the rear mounting brackets, checking that you do not lose the rubber mounts in the canister brackets. Start by taking the connector off the vapor lines after squeezing it, remove the nuts and then lift out the canister from the bracket. To attach the canister, place it onto the fitting on the front end of the vehicle, tighten the mounting nuts and attach the hoses to the vapor canister. Add the rubber isolator to the canister brackets and then slide on the brackets to the mounting brackets. Fix the assembly mounting nut to the engine block, attach the electrical connector to the pump, secure it and finally slap on the EVAP line. Go over the protective inner shield and the tire again, place the vehicle on the ground and reattach the negative battery cable.

OEM Chrysler 300 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Vapor Canisters found

View related parts
Chrysler 300 Vapor Canister Part Number: 4891645AA
$320.45 MSRP: $489.00
You Save: $168.55 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Vapor Canister Part Number: 4593937AC
$214.08 MSRP: $322.00
You Save: $107.92 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Vapor Canister Part Number: 68423700AC
$161.68 MSRP: $247.00
You Save: $85.32 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 68423700AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2023 Chrysler 300 | S | 8 Cyl 5.7 L GAS
- 2020 Chrysler 300
View related parts
Chrysler 300 Vapor Canister Part Number: 68231653AF
$226.60 MSRP: $335.00
You Save: $108.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 68057086AD, 68057086AC, 68231653AE, 68231653AA, 68231653AC, 68231653AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chrysler 300 | Base, C, C Luxury, C Platinum, Limited, S, SRT8, SRT8 Core | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Vapor Canister Part Number: 4578587AH
$312.71 MSRP: $466.00
You Save: $153.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Evaporative Emissions System Lines; Vent Hose
- Replaces: 68027916AA, 4578587AE, 4578587AF, 4578587AD, 68027916AB, 4578587AG, 4578587AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler 300 | C, C SRT8, LX, Limited, S, Signature Series, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Vapor Canister Part Number: 68401344AF
$252.66 MSRP: $376.00
You Save: $123.34 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister
- Replaces: 68401344AE, 68401344AC, 68401344AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2023 Chrysler 300 | C, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Vapor Canister Part Number: 68421012AB
$182.86 MSRP: $277.00
You Save: $94.14 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister
- Replaces: 68342222AB, 68421012AA, 68342222AC, 68342222AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chrysler 300 | C, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler 300 Vapor Canister Part Number: 4891761AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler 300 | Base, C, C SRT8, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler 300 Vapor Canister Part Number: 4578366AG
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 4578366AE, 4578366AD, 4578366AC, 4578366AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler 300 | Base, Limited, Touring | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8

Chrysler 300 Vapor Canister

Choose OEM Vapor Canister that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Vapor Canister follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Vapor Canister in Chrysler 300 series is part of the evaporative emission control system commonly referred to as the EVAP that prevents emission of hydrocarbons to the atmosphere. It works in the following manner: it holds fuel vapors from the fuel tank and disperses them through the engine when necessary; these vapors mix with air and are burnt in the combustion chamber. The canister itself usually holds activated charcoal, which, in view of the large area of its surface, has an ability to adsorb the fuel vapors. In the course of time, the modifications of the Vapor Canister appeared in different models of the Chrysler 300 automobiles, and some of them were equipped with the filter, which is replaceable to secure efficiency. Subsequent generations include extra features used for diagnostics that include a canister vent solenoid, and fuel tank pressure sensor that improves on the ability of the system to detect leaks. Such evolution can be attributed in knowledge improvement of emissions' control devices so as to meet the environmental benchmarks while at the same promoting vehicle performance.

Chrysler 300 Vapor Canister Parts and Q&A

Vapor Canister
4578587AH
Q: How to Remove the Vapor Canister on Chrysler 300?
A:
Connecting the negative Battery Cable after the canister as been removed is the next important step. After that, raise the vehicle and take out the right rear wheel and the splash shield found underneath. After that, unhook the EVAP line and separate the electrical connector from the rest. Undo the nut on the mount and slide the assembly toward the front off the rear brackets. Simply pull the vapor lines off the EVAP canister by squeezing the connectors and checking that you do not lose the rubber mounts while removing them. Afterwards, get rid of the mounting nuts and carefully take the canister out of the bracket.
Vapor Canister
4891645AA
Q: How to Service and Repair a Vapor Canister on Chrysler 300?
A:
The first step in serving or fixing the Evaporative Emission Control Canister is to disconnect the Battery Cable and jack up the vehicle. Take out the rear tire on the driver's side and then take off the inner splash shield. Next, disconnect the EVAP line and pull the electrical connector off the pump. Loosen and remove the mounting nut and move the assembly forwards off the rear mounting brackets, checking that you do not lose the rubber mounts in the canister brackets. Start by taking the connector off the vapor lines after squeezing it, remove the nuts and then lift out the canister from the bracket. To attach the canister, place it onto the fitting on the front end of the vehicle, tighten the mounting nuts and attach the hoses to the vapor canister. Add the rubber isolator to the canister brackets and then slide on the brackets to the mounting brackets. Fix the assembly mounting nut to the engine block, attach the electrical connector to the pump, secure it and finally slap on the EVAP line. Go over the protective inner shield and the tire again, place the vehicle on the ground and reattach the negative battery cable.