Other Name: Seat Belt - Rear Center Shoulder; Seat Belt Lap and Shoulder Belt, Center Rear; Center Seat Belt; Seat Belt Rear Counter Shoulder; Seat Belt Rear Center Shoulder
Position: Rear Center
Item Weight: 1.90 Pounds
Item Dimensions: 4.1 x 4.2 x 3.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5JY85BD5AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
Other Name: Extender - Seat Belt; Seat Belt Extension, Center, Front, Rear; Extender Seat Belt Center And Left Seat; Extender Seat Belt Rear; Extender Seat Belt
Position: Center
Item Weight: 0.90 Pounds
Item Dimensions: 10.3 x 3.2 x 1.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5083695AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Other Name: Seat Belt - Rear Center Shoulder; Seat Belt Lap and Shoulder Belt, Center Rear; Center Seat Belt; Seat Belt Rear Counter Shoulder; Seat Belt Rear Center Shoulder
Position: Rear Center
Item Weight: 1.90 Pounds
Item Dimensions: 4.0 x 4.2 x 2.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5JY85ZJ3AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
Other Name: Seat Belt - Rear Inner; Seat Belt Receptacle, Center Right, Center Right Outer; Latch; Seat Belt Rear Inner Right
Position: Rear Center Passenger Side
Item Weight: 0.80 Pounds
Item Dimensions: 7.9 x 2.3 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5HP921J3AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Aspen Submodels:
Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
| Page 1 of 3 |Next >
1-20 of 43 Results
2007 Chrysler Aspen Seat Belt Parts and Q&A
Q: How Can Seat Belt Use Ensure Safety During Child Restraint Anchor Service on 2007 Chrysler Aspen?
A: Safety requires all seat belts, mounting hardware, retractors, tether straps and anchors be inspected for proper use and to replace any cut, torn or twisted belts, untwist twisted ones, tighten loose fasteners and replace ineffective buckles or anchors. Fixing these components isn't recommended and you should only use accessories and parts available in the Mopar(R) Parts Catalog. Fit the seat belt and retractor between the seat back and its frame as a whole and insert the tabs on the retractor bracket into the matching keyed slots in the back of the seat. Hold the retractor in place with two screws in the first hook and one in the second hook, tightening them to 27 Nm (20 ft. lbs.) Add back the trim cover for the center seat, then run the seat belt lower anchor through the jacket web guide bezel as you position it on top of the center seat back panel. Attach the bezel to the strap by screwing it in place and tightening them to 2 Nm (20 in. lbs.). Connect the lower anchor of the second row center seat belt to the hinge bracket with the anti-rotation tab facing into the bracket opening, then attach the other end of the anchor with a tightened screw at 43 Nm (32 ft. lbs.). Fit the center seat back left hinge bracket cover over the bracket and hold it with three screws that are tightened to 2 Nm (20 in. lbs.). Finally, pull the left rear second row upright and put it back into place.