How to Maintain and Fix a Door Lock Cylinder on 2007 Chrysler Crossfire?

To start servicing the door lock cylinder, pull off the door weather strip near the lock before you begin. Afterward, remove the screw enough to let the door pull out but don't let it come off completely; instead, secure the handle with the screw to the door, still slightly loose, before retightening it just enough to hold it in position. Next, take out the 4 mm Allen screw that's on the door face and finally remove the lock cylinder.

OEM 2007 Chrysler Crossfire Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Lock Cylinder found

View related parts
2007 Chrysler Crossfire Lock Cylinder, Black/Silver, Front Outer Part Number: 5101004AA
Product Specifications
- Other Name: Cylinder Lock - Door Lock; Exterior Door Handle, Front Outer; Door Lock Cylinder, Front; Handle, Outside; Cylinder Door Lock See Note; Cylinder Door Lock; Door Lock Cylinder
- Position: Front Outer
- Replaces: 1ED90XZAAA, 1ED90P41AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.1 x 1.4 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5101004AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Door Lock Cylinder Parts and Q&A

Q: How to Maintain and Fix a Door Lock Cylinder on 2007 Chrysler Crossfire?
A: To start servicing the door lock cylinder, pull off the door weather strip near the lock before you begin. Afterward, remove the screw enough to let the door pull out but don't let it come off completely; instead, secure the handle with the screw to the door, still slightly loose, before retightening it just enough to hold it in position. Next, take out the 4 mm Allen screw that's on the door face and finally remove the lock cylinder.