How to Install the Front Fender Liner Using the Wheelhouse on 2007 Chrysler Crossfire?

Install the splash shield onto the vehicle first and then proceed with putting in the front fender liner. Following that, install the two lower screws through the side of the rocker panel onto the bolts beneath. After that, insert five plastic retainer nuts and five retainer screws inside the wheelhouse splash shield. After everything is in order, fit the good front tire and wheel to the vehicle.

OEM 2007 Chrysler Crossfire Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheelhouses found

View related parts
2007 Chrysler Crossfire Fender Liner Part Number: 5098682AA
Product Specifications
- Other Name: Shield - Wheel House; Fender Splash Shield; Shield Wheel House Front Assembly
- Item Weight: 1.40 Pounds
- Item Dimensions: 20.5 x 15.4 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098682AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2007 Chrysler Crossfire Fender Liner Part Number: 5098681AA
Product Specifications
- Other Name: Shield - Wheel House; Fender Splash Shield; Shield Wheel House Front Assembly
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098681AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Wheelhouse Parts and Q&A

Q: How to Install the Front Fender Liner Using the Wheelhouse on 2007 Chrysler Crossfire?
A: Install the splash shield onto the vehicle first and then proceed with putting in the front fender liner. Following that, install the two lower screws through the side of the rocker panel onto the bolts beneath. After that, insert five plastic retainer nuts and five retainer screws inside the wheelhouse splash shield. After everything is in order, fit the good front tire and wheel to the vehicle.