How to Service and Repair an Ignition Lock Cylinder on 2007 Chrysler Crossfire?

If the ignition lock cylinder or its key is notched, coating them with lock cylinder grease should help; if the problem stays, change both components. Open the hold by pushing down on the escutcheon with the proper device. After that, insert a plastic wedge behind the transponder coil and pull it away from the lock cylinder. After that, put the sleeve down onto the cap and with the key rotate the lock cylinder to position "1." In the end, rotate the cap back against the lock by a quarter turn and pull it out.

OEM 2007 Chrysler Crossfire Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
2007 Chrysler Crossfire Ignition Lock Cylinder Part Number: 68533820AA
$222.07 MSRP: $327.00
You Save: $104.93 (33%)
Product Specifications
- Other Name: Cylinder Lock - Ignition Lock; Ignition Lock Assembly; Lock Cylinder
- Replaces: 5101710AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68533820AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Ignition Lock Cylinder Parts and Q&A

Q: How to Service and Repair an Ignition Lock Cylinder on 2007 Chrysler Crossfire?
A: If the ignition lock cylinder or its key is notched, coating them with lock cylinder grease should help; if the problem stays, change both components. Open the hold by pushing down on the escutcheon with the proper device. After that, insert a plastic wedge behind the transponder coil and pull it away from the lock cylinder. After that, put the sleeve down onto the cap and with the key rotate the lock cylinder to position "1." In the end, rotate the cap back against the lock by a quarter turn and pull it out.