How to Remove and Replace an Antenna on 2007 Chrysler Crossfire?

Before you take out the radio antenna, be sure to disconnect and isolate the battery's negative cable first. Now, lift the left side trunk carpet to the side. Take the antenna mast off the antenna body by unscrewing it. Pull the retaining nut out of the way on the underside of the bracket and then carefully pull the entire antenna body up through the rubber grommet. Next, take out the antenna lead from the bottom part of the antenna.

OEM 2007 Chrysler Crossfire Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Antennas found

View related parts
2007 Chrysler Crossfire Antenna Mast Part Number: 5104986AA
Product Specifications
- Other Name: Mast - Antenna; Antenna Cable; Mast Antenna
- Item Weight: 0.50 Pounds
- Item Dimensions: 16.3 x 0.6 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104986AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2007 Chrysler Crossfire Antenna Base Part Number: 5161959AB
Product Specifications
- Other Name: Base - Antenna; Radio Antenna Mast; Antenna
- Replaces: 5161959AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5161959AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Antenna Parts and Q&A

Q: How to Remove and Replace an Antenna on 2007 Chrysler Crossfire?
A: Before you take out the radio antenna, be sure to disconnect and isolate the battery's negative cable first. Now, lift the left side trunk carpet to the side. Take the antenna mast off the antenna body by unscrewing it. Pull the retaining nut out of the way on the underside of the bracket and then carefully pull the entire antenna body up through the rubber grommet. Next, take out the antenna lead from the bottom part of the antenna.