How to Service and Repair a Throttle Body on 2007 Chrysler Crossfire?

Before servicing or repairing the throttle body, remove the negative battery cable. After that, pick up both sides of the engine cover and carefully pull it up. Remove the throttle body inlet tube next and afterward disconnect the connector on the throttle body harness (3). Then, pull off the PCV hose (1) from the throttle body. Remove the TH rotor bracket and all three bolts holding the throttle body in place. At last, carefully remove the throttle body (5) and its gasket from your engine.

OEM 2007 Chrysler Crossfire Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Body found

View related parts
2007 Chrysler Crossfire Throttle Body Part Number: 5098914AA
Product Specifications
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.3 x 6.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098914AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2007 Chrysler Crossfire Throttle Body Parts and Q&A

Q: How to Service and Repair a Throttle Body on 2007 Chrysler Crossfire?
A: Before servicing or repairing the throttle body, remove the negative battery cable. After that, pick up both sides of the engine cover and carefully pull it up. Remove the throttle body inlet tube next and afterward disconnect the connector on the throttle body harness (3). Then, pull off the PCV hose (1) from the throttle body. Remove the TH rotor bracket and all three bolts holding the throttle body in place. At last, carefully remove the throttle body (5) and its gasket from your engine.