How Should You Prepare for a Windshield Repair on 2007 Chrysler Sebring?

In case of intending to repair the unit, review all warnings and cautions before continuing with the repair procedure. First, you remove the cowl grille and the rear view mirror. When removing moldings or cutting urethane around the windshield exercise caution to avoid damaging painted surfaces. Then reduce the molding from the top on the windshield. Use a wire type windshield cut out tool both and an assistant to cut and separate the urethane adhesive that holds the windshield to the windshield fence. Finally, slowly remove the windshield out of the car.

OEM 2007 Chrysler Sebring Windshield

Glass Windshield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Windshield found

View related parts
2007 Chrysler Sebring Windshield, Front Part Number: 68018347AB
Product Specifications
- Other Name: Windshield - Shipping Assembly-30 Lite; Windshield Glass, Front; Windshield Shipping Assembly-30 Lite Glass
- Position: Front
- Replaces: 68018347AA
- Item Weight: 40.20 Pounds
- Item Dimensions: 72.1 x 49.0 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68018347AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Chrysler Sebring Submodels:
- Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2007 Chrysler Sebring Windshield Parts and Q&A

Q: How Should You Prepare for a Windshield Repair on 2007 Chrysler Sebring?
A: In case of intending to repair the unit, review all warnings and cautions before continuing with the repair procedure. First, you remove the cowl grille and the rear view mirror. When removing moldings or cutting urethane around the windshield exercise caution to avoid damaging painted surfaces. Then reduce the molding from the top on the windshield. Use a wire type windshield cut out tool both and an assistant to cut and separate the urethane adhesive that holds the windshield to the windshield fence. Finally, slowly remove the windshield out of the car.