Other Name: Seat Belt-3 Passenger Inner; Seat Belt Receptacle, Rear Left; Latch; Seat Belt 3 Passenger Inner
Position: Rear Inner
Item Weight: 1.40 Pounds
Item Dimensions: 7.4 x 4.2 x 3.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: RK991D5AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Chrysler Town & Country Submodels:
Base, EX, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
| Page 1 of 3 |Next >
1-20 of 46 Results
2007 Chrysler Town & Country Seat Belt Parts and Q&A
Q: How to Remove and Service a Seat Belt on 2007 Chrysler Town & Country?
A: Take out the seats from the front and back to service and repair the seat belt. After that, release the bolt for the first row seat belt lower anchor and the upper turning loop anchor bolt. Then, take out the liftgate sill plate and trim near the top of the liftgate. Following that, take out the bolts from the second seat lower anchor and the upper turning loop anchor. Subsequently, after removing the D-pillar trim, you will find the speaker connector on the left where the dash is, but the right side's connector will be located at the back of the trim after removing it. After that, open the door one more time to remove the quarter trim bolster, plus the quarter trim panel screws and quarter trim panel. After this, disconnect the first row seat belt which includes taking out the retractor retaining bolt and seat belt, from the vehicle.