How to Safely Install the Air Bag Control Module to Ensure Proper Functionality on 2007 Dodge Caliber?

To install the Air Bag Control Module, you will need to make sure that the ORC covering panel is in place. Insert the ORC and connect the two connectors and fix them with three retaining nuts screwed up to 9 Nm. Install the floor shifter bezel, do not connect the battery negative cable until after the system test.

OEM 2007 Dodge Caliber Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

View related parts
2007 Dodge Caliber Control Module Part Number: 4672501AE
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Diagnostic Module
- Replaces: 4672501AB, 4672501AD, 4672501AC
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.1 x 5.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4672501AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- R/T, SE, SXT | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caliber Control Module Part Number: 4672602AC
Product Specifications
- Other Name: Module - Occupant Restraint; Air Bag Control Module; Module Occupant Restraint
- Replaces: 4672602AB
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4672602AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caliber Submodels:
- R/T, SE, SXT | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Dodge Caliber Air Bag Control Module Parts and Q&A

Q: How to Safely Install the Air Bag Control Module to Ensure Proper Functionality on 2007 Dodge Caliber?
A: To install the Air Bag Control Module, you will need to make sure that the ORC covering panel is in place. Insert the ORC and connect the two connectors and fix them with three retaining nuts screwed up to 9 Nm. Install the floor shifter bezel, do not connect the battery negative cable until after the system test.