JeepParts
My Garage
My Account
Cart
OEM 2007 Dodge Caliber Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Battery Cables found
2007 Dodge Caliber Wire Harness Part Number: 4801329AD
$40.30 MSRP: $59.20You Save: $18.90 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Wiring - Battery Feed; Battery Cables; Battery Cable; Wiring Battery Feed
- Replaces: 4801329AB
- Item Weight: 1.50 Pounds
- Item Dimensions: 1.4 x 1.7 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4801329AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Caliber Wiring Harness Part Number: 4795318AE
Product Specifications- Other Name: Wiring - Battery; Battery Cables; Ground Strap; Battery Cable; Positive Cable; Negative Cable; Wiring Battery
- Replaces: 4795318AD
- Item Weight: 1.70 Pounds
- Item Dimensions: 23.1 x 7.2 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4795318AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Caliber Battery Cable Parts and Q&A
- Q: How to Properly Position and Connect Battery Cables in the Engine Compartment on 2007 Dodge Caliber?A: Guide the battery cables into place in the engine area and attach one pushpin, fastener or routing clip to each cable until they are back in their spots. Connect the battery cable to the B+ terminal of the starter motor and tighten the corresponding cable nut to 13 Nm (115 in. lbs.) and do the same for the generator B+ terminal, tightening the other nut to 14 Nm (125 in. lbs.). Attach the nut that links the negative cable to the body ground stud and tighten it until you reach 12 Nm (9 ft. lbs.). Keep in mind that that the negative and positive connections for the battery differ for diesel and gasoline vehicles, so make sure to find them first before servicing any parts. Fix the positive wire into place on the battery, then connect the negative wire and tighten its nuts with 5 Nm of torque. Attach the nut connecting the TIPM cable to its bracket on the battery clamp stud and install the air cleaner fresh air duct, fixing it by twisting the two retaining clips.
Related 2007 Dodge Caliber Parts
2007 Dodge Caliber Alternator
2007 Dodge Caliber Starter Motor
2007 Dodge Caliber Battery Terminal
2007 Dodge Caliber Alternator Bracket
2007 Dodge Caliber Battery Tray
2007 Dodge Caliber Car Batteries