How to Service and Repair the MAP Sensor on a 2.4L Engine on 2007 Dodge Caravan?

Before you start working on the Manifold Pressure/Vacuum Sensor on a 2.4L, detach the negative battery cable. After that, detach the electrical connector and vacuum hose from the MAP sensor. After that, take out the two screws that hold the sensor in place on the intake manifold.

OEM 2007 Dodge Caravan MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2007 Dodge Caravan M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caravan Submodels:
- Base, C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2007 Dodge Caravan M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caravan Submodels:
- SE | 2.4L L4, 4 Cyl 2.4 L GAS

2007 Dodge Caravan MAP Sensor Parts and Q&A

Q: How to Service and Repair the MAP Sensor on a 2.4L Engine on 2007 Dodge Caravan?
A: Before you start working on the Manifold Pressure/Vacuum Sensor on a 2.4L, detach the negative battery cable. After that, detach the electrical connector and vacuum hose from the MAP sensor. After that, take out the two screws that hold the sensor in place on the intake manifold.