How to Service a MAP Sensor on 2006 Dodge Caravan?

Disconnect the negative battery cable to begin service of the Manifold Pressure/Vacuum Sensor. After that, take out the electrical connector and vacuum hose from the MAP sensor. Remove the two screws that hold the sensor to the intake manifold. During installation, hold the sensor in place, fix it with the two screws and tighten them as needed. Reattach the electrical plug and vacuum line to the MAP sensor and then reattach the black battery wire.

OEM 2006 Dodge Caravan MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2006 Dodge Caravan M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Caravan Submodels:
- Base, C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2006 Dodge Caravan M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Caravan Submodels:
- SE | 4 Cyl 2.4 L GAS

2006 Dodge Caravan MAP Sensor Parts and Q&A

Q: How to Service a MAP Sensor on 2006 Dodge Caravan?
A: Disconnect the negative battery cable to begin service of the Manifold Pressure/Vacuum Sensor. After that, take out the electrical connector and vacuum hose from the MAP sensor. Remove the two screws that hold the sensor to the intake manifold. During installation, hold the sensor in place, fix it with the two screws and tighten them as needed. Reattach the electrical plug and vacuum line to the MAP sensor and then reattach the black battery wire.