How to Service and Repair a Throttle Body on 2007 Dodge Caravan?

The throttle body should be serviced or repaired after you remove the negative cable from the battery. After that, get rid of the air inlet from the throttle body hose clamp. Afterward, remove the throttle and speed control cables from the lever and bracket. Get rid of the connections between the idle air control motor, throttle position sensor and the electrical system. Next, remove all the bolts from the throttle body to intake manifold gasket and take both the throttle body and its gasket out.

OEM 2007 Dodge Caravan Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Bodies found

View related parts
2007 Dodge Caravan Throttle Body Part Number: 5104747AA
Product Specifications
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.1 x 9.4 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104747AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Caravan Submodels:
- SE | 4 Cyl 2.4 L GAS
View related parts
2007 Dodge Caravan Throttle Body Part Number: 5104745AA
Product Specifications
- Item Weight: 2.60 Pounds
- Item Dimensions: 11.4 x 9.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104745AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Caravan Submodels:
- Base, C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2007 Dodge Caravan Throttle Body Parts and Q&A

Q: How to Service and Repair a Throttle Body on 2007 Dodge Caravan?
A: The throttle body should be serviced or repaired after you remove the negative cable from the battery. After that, get rid of the air inlet from the throttle body hose clamp. Afterward, remove the throttle and speed control cables from the lever and bracket. Get rid of the connections between the idle air control motor, throttle position sensor and the electrical system. Next, remove all the bolts from the throttle body to intake manifold gasket and take both the throttle body and its gasket out.