How to Service and Repair a Wheel Bearing Without Removing the Steering Knuckle on 2007 Dodge Caravan?

Service or repair the wheel bearing by lifting the car, taking off the four lug nuts and removing the wheel and tire. After that, remove the cotter pin, nut lock and spring washer attached to the stub axle. Enlist someone to help apply the brakes and turn off the hub with a wrench, while you remove the hub nut. After that, separate the disc brake caliper and adapter as an assembly from the knuckle and use a bungee cord or wire to hold them in a spot where they do not hang by their brake hoses. Later, pull out the brake rotor from the hub and bearing. Gently push in at the end of the driveshaft stub shaft which will force its splines away from the hub splines. Remove the bolts from the ends of each steering knuckle hub and bearing, taking care not to harm the ABS tone wheel on the driveshaft stub shaft. After that, extract the hub and bearing assembly from the steering knuckle.

OEM 2007 Dodge Caravan Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
2007 Dodge Caravan Hub & Bearing, Front Part Number: 4641517AD
$323.46 MSRP: $538.00
You Save: $214.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Brake; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub & Bearing; Front Hub; Hub And Bearing Brake; Wheel Bearing and Hub Assembly; Wheel Bearing; Hub Assembly
- Position: Front
- Item Weight: 8.90 Pounds
- Item Dimensions: 6.8 x 7.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4641517AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caravan Submodels:
- Base, C/V, ES, Ec, LE, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, BATTERY EV (EV/BEV)
View related parts
2007 Dodge Caravan Hub & Bearing, Rear Part Number: 4721515AD
$340.11 MSRP: $456.00
You Save: $115.89 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Brake; Rear Wheel Bearing and Hub Assembly; Hub Repair Kit; Wheel Bearing Kit.; Hub; Hub And Bearing Brake; Wheel Bearing and Hub Assembly; Wheel Bearing
- Position: Rear
- Replaces: 4721515AC
- Item Weight: 9.20 Pounds
- Item Dimensions: 7.0 x 7.0 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721515AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caravan Submodels:
- Base, C/V, Ec, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2007 Dodge Caravan Hub & Bearing, Rear Part Number: 4683869AB
Product Specifications
- Other Name: Bearing - Brake; Rear Wheel Bearing and Hub Assembly; Hub Repair Kit.; Hub; Hub And Bearing Brake; Wheel Bearing and Hub Assembly; Wheel Bearing
- Position: Rear
- Item Weight: 8.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4683869AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Caravan Submodels:
- Base, C/V, Ec, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2007 Dodge Caravan Wheel Bearing Parts and Q&A

Q: How to Service and Repair a Wheel Bearing Without Removing the Steering Knuckle on 2007 Dodge Caravan?
A: Service or repair the wheel bearing by lifting the car, taking off the four lug nuts and removing the wheel and tire. After that, remove the cotter pin, nut lock and spring washer attached to the stub axle. Enlist someone to help apply the brakes and turn off the hub with a wrench, while you remove the hub nut. After that, separate the disc brake caliper and adapter as an assembly from the knuckle and use a bungee cord or wire to hold them in a spot where they do not hang by their brake hoses. Later, pull out the brake rotor from the hub and bearing. Gently push in at the end of the driveshaft stub shaft which will force its splines away from the hub splines. Remove the bolts from the ends of each steering knuckle hub and bearing, taking care not to harm the ABS tone wheel on the driveshaft stub shaft. After that, extract the hub and bearing assembly from the steering knuckle.