Other Name: Arm - Upper Control; Front Left Suspension Control Arm and Ball Joint Assembly.; Upper Control Arm; Arm Upper Control Front; Suspension Control Arm; Control Arm
Other Name: Arm - Upper Control; Front Right Suspension Control Arm and Ball Joint Assembly.; Upper Control Arm; Arm Upper Control Front; Suspension Control Arm; Control Arm
Position: Front Upper Passenger Side
Replaces: 5180596AB, 4895668AA, 5180596AC
Item Weight: 5.80 Pounds
Item Dimensions: 12.4 x 12.9 x 4.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4895668AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
Base, Daytona, Daytona 392, GT, GT Plus, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT8, SXT, SXT Plus, SXT Plus Leather, Scat Pack | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS
Other Name: Arm - Lower Control; Suspension Control Arm, Front Lower Rearward; Suspension Control Arm Bushing; Upper Control Arm; Arm Lower Control Front Lower; Arm Lower Control Front; Suspension Control Arm; Control Arm
Position: Front Lower
Replaces: 68002123AA, 68002123AB
Item Weight: 6.40 Pounds
Item Dimensions: 3.1 x 4.1 x 16.8 inches
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: 68002123AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
Other Name: Arm - Lower Control; Suspension Control Arm, Front Lower Rearward; Suspension Control Arm Bushing; Arm Lower Control Front; Arm Control Lower; Arm Control; Suspension Control Arm; Control Arm
Other Name: Arm - Lower Control; Front Right Suspension Control Arm and Ball Joint Assembly.
Position: Front Lower Passenger Side
Replaces: 4895040AC
Item Weight: 17.90 Pounds
Item Dimensions: 6.7 x 16.0 x 18.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4895040AF
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
Base, Pursuit, R/T, SE, SXT | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
2007 Dodge Charger Control Arm Parts and Q&A
Q: How to remove the upper control arm on 2007 Dodge Charger?
A: Start by moving the coolant recovery container to the other side if removing the left upper control arm and detach the IPM and move it to the other side if the right upper control arm is being removed. Remove the cap at the top of the shock assembly for the front shock tower when available. After that, get rid of the three rotating shock assembly nuts plus the three nuts from the upper control arm bolts. Get the vehicle off the ground, remove the nut secu Pull apart the clip that holds the wheel speed sensor cable against the brake tube. Back off the nut attached to the end of the upper ball joint stud until it evenly reaches the end of the stud so distortion can be avoided as you apply Puller, Special Tool 9360. Pull the Puller past the ball joint seal boot until the top ball joint stud comes free from the knuckle. Unscrew the nut at the tip of the link joint rod and push downward on the shock assembly till the studs are free from the shock tower, giving you room to see the upper control arm bolts. Should you be working on the right upper control arm, release the headlamp leveling sensor connection from the arm. Remove the three upper control arm mounting bolts and take the upper control arm from the bracket in the shock tower.