How to Maintain and Repair a Drive Shaft on 2007 Dodge Charger?

To service or repair the front drive or propeller shaft, shift the gearshift to Neutral and then raise the vehicle on a hoist. After that, take out the propeller shaft heat shield and mark the shaft and front axle flanges with alignment notches. Use a wrench to remove the four front shaft bolts and, after that, use an awl or marker pen to place alignment index marks on the shaft and flange of the transfer case. Then, take out and discard the four front propeller shaft-to-transfer case flange bolts and remove the whole propeller shaft assembly after that.

OEM 2007 Dodge Charger Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Drive Shafts found

View related parts
2007 Dodge Charger Drive Shaft, Front Part Number: 4593542AB
$1075.17 MSRP: $1640.00
You Save: $564.83 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Drive Shaft, Front; Driveshaft; Drive Shaft Assembly; Shaft Drive Front
- Position: Front
- Item Weight: 9.30 Pounds
- Item Dimensions: 28.3 x 4.9 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593542AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Daytona R/T, Pursuit, R/T, SE, SRT8, SXT, SXT Plus | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
View related parts
2007 Dodge Charger Drive Shaft Part Number: 4593546AD
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear 2-Piece
- Replaces: 4593546AC
- Item Weight: 22.90 Pounds
- Item Dimensions: 82.1 x 9.5 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593546AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Daytona R/T, Pursuit, R/T, SXT | 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Charger Drive Shaft Part Number: 5037640AE
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 5037640AD, 5037640AB, 5037640AC
- Item Weight: 33.80 Pounds
- Item Dimensions: 87.6 x 9.6 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037640AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS
View related parts
2007 Dodge Charger Drive Shaft Part Number: 4578035AH
Product Specifications
- Other Name: Shaft - Drive; Axle Shaft; Driveshaft; Axle Assembly
- Replaces: 4578035AE, 4578035AG, 4578035AC, 4578035AF, 4578035AD, 4578035AB
- Item Weight: 30.90 Pounds
- Item Dimensions: 82.8 x 10.5 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578035AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, Pursuit, SE, SXT | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Charger Drive Shaft Part Number: 4593679AC
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 4593679AA, 4593679AB
- Item Weight: 28.40 Pounds
- Item Dimensions: 87.7 x 25.5 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593679AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Charger Submodels:
- Base, SE | 2.7L V6, 6 Cyl 2.7 L GAS

2007 Dodge Charger Drive Shaft Parts and Q&A

Q: How to Maintain and Repair a Drive Shaft on 2007 Dodge Charger?
A: To service or repair the front drive or propeller shaft, shift the gearshift to Neutral and then raise the vehicle on a hoist. After that, take out the propeller shaft heat shield and mark the shaft and front axle flanges with alignment notches. Use a wrench to remove the four front shaft bolts and, after that, use an awl or marker pen to place alignment index marks on the shaft and flange of the transfer case. Then, take out and discard the four front propeller shaft-to-transfer case flange bolts and remove the whole propeller shaft assembly after that.