How to Remove and Replace a Brake Master Cylinder on 2007 Dodge Durango?

Place the prop rod on the brake pedal before you disconnect and replace the brake master cylinder to keep pressure inside the brake lines. After that, take off the reservoir's cap and drain the fluid into a container. Take out the electrical wire from the fluid level switch that controls the reservoir. After that, take off the reservoir mounting bolts and lift the reservoir upwards as well as to the side to remove it from the master cylinder. In the end, take out the old seals in the cylinder body.

OEM 2007 Dodge Durango Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2007 Dodge Durango Master Cylinder Part Number: 5183198AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 3.50 Pounds
- Item Dimensions: 10.7 x 7.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183198AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, SLT, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Durango Master Cylinder Part Number: 5179926AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Assembly
- Replaces: 5179926AA, 68003625AA
- Item Weight: 3.30 Pounds
- Item Dimensions: 11.7 x 9.9 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179926AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2007 Dodge Durango Brake Master Cylinder Parts and Q&A

Q: How to Remove and Replace a Brake Master Cylinder on 2007 Dodge Durango?
A: Place the prop rod on the brake pedal before you disconnect and replace the brake master cylinder to keep pressure inside the brake lines. After that, take off the reservoir's cap and drain the fluid into a container. Take out the electrical wire from the fluid level switch that controls the reservoir. After that, take off the reservoir mounting bolts and lift the reservoir upwards as well as to the side to remove it from the master cylinder. In the end, take out the old seals in the cylinder body.