How to Remove the ABS Control Module from the Hydraulic Control Assembly on 2007 Dodge Durango?

To remove the Hydraulic Control Assembly for the Antilock Brakes, disconnect the negative battery cable, install a brake pedal prop rod, and siphon the master cylinder. Disconnect brake lines and the electrical harness, remove mounting nuts, support the vehicle, and lift the HCU assembly out through the left wheel well.

OEM 2007 Dodge Durango ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

View related parts
2007 Dodge Durango Control Module Part Number: 5183488AC
Product Specifications
- Other Name: Module - ABS; ABS Control Module; Module
- Replaces: 5183488AA
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.2 x 4.7 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183488AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Durango Modulator Valve Part Number: 5183487AE
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; Modulator
- Replaces: 68018840AA
- Item Weight: 6.60 Pounds
- Item Dimensions: 9.6 x 7.7 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183487AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Limited, SLT, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2007 Dodge Durango ABS Control Module Parts and Q&A

Q: How to Remove the ABS Control Module from the Hydraulic Control Assembly on 2007 Dodge Durango?
A: To remove the Hydraulic Control Assembly for the Antilock Brakes, disconnect the negative battery cable, install a brake pedal prop rod, and siphon the master cylinder. Disconnect brake lines and the electrical harness, remove mounting nuts, support the vehicle, and lift the HCU assembly out through the left wheel well.