How to Locate, Remove, and Inspect a Fuel Pump Relay on 2007 Dodge Durango?

The fuel pump relay is located in the Power Distribution Center (PDC), which can be recognized by the label of the cover of the PDC. To eliminate it, remove the cover and examine the relay and connector terminal either by repairing or replacing damaged and corroded ones. Make sure that pin heights are uniform.

OEM 2007 Dodge Durango Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2007 Dodge Durango Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Durango Submodels:
- Adventurer, Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SE, SLT, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2007 Dodge Durango Fuel Pump Relay Parts and Q&A

Q: How to Locate, Remove, and Inspect a Fuel Pump Relay on 2007 Dodge Durango?
A: The fuel pump relay is located in the Power Distribution Center (PDC), which can be recognized by the label of the cover of the PDC. To eliminate it, remove the cover and examine the relay and connector terminal either by repairing or replacing damaged and corroded ones. Make sure that pin heights are uniform.