How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2006 Dodge Durango?

Inside the PDC, the fuel pump relay can be found and its place is noted on the cover's label. First, disconnect the PDC cover before pulling out the relay from the PDC. Check all terminals for signs of damage or corrosion and replace or fix them if necessary, before you install the relay again. Also, the pin height should be the same for every terminal in the PDC connector, so perform repairs or replacements before mounting the connector. After placing the relay into the PDC, put the PDC cover back into place.

OEM 2006 Dodge Durango Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2006 Dodge Durango Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Dodge Durango Submodels:
- Adventurer, Citadel, GT, GT Plus, GT Premium, Limited, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SE, SLT, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, SRT Hellcat, SRT Hellcat Plus, SRT Hellcat Premium, SXT, SXT Plus, Special Service | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2006 Dodge Durango Fuel Pump Relay Parts and Q&A

Q: How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2006 Dodge Durango?
A: Inside the PDC, the fuel pump relay can be found and its place is noted on the cover's label. First, disconnect the PDC cover before pulling out the relay from the PDC. Check all terminals for signs of damage or corrosion and replace or fix them if necessary, before you install the relay again. Also, the pin height should be the same for every terminal in the PDC connector, so perform repairs or replacements before mounting the connector. After placing the relay into the PDC, put the PDC cover back into place.