JeepParts
My Garage
My Account
Cart
OEM 2007 Dodge Durango Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Intake Manifolds found
2007 Dodge Durango Intake Manifold Part Number: 5175896AB
$716.77 MSRP: $1050.00You Save: $333.23 (32%)Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Package Intake
- Item Weight: 21.40 Pounds
- Item Dimensions: 25.3 x 17.2 x 16.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5175896AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Durango Intake Manifold Part Number: 53032774AA
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes 1, 3, 4, 5, 6, 12; Manifold Intake
- Item Weight: 13.40 Pounds
- Item Dimensions: 22.2 x 15.1 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032774AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Durango Intake Manifold Part Number: 53032999AD
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes Items 2, 3, 4, 5, 6, 7; Manifold Intake
- Item Weight: 12.10 Pounds
- Item Dimensions: 18.9 x 17.0 x 13.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032999AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Durango Intake Manifold Part Number: 53032795AC
Product Specifications- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 53032803AB, 53032803AA, 53032795AB, 53032795AA, 53032803AC
- Item Weight: 12.00 Pounds
- Item Dimensions: 12.7 x 16.3 x 20.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032795AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Durango Intake Manifold Parts and Q&A
- Q: How Is the Intake Manifold and Its Components Installed on 2007 Dodge Durango?A: Start the intake manifold installation by putting the intake manifold seals in place and then place the manifold. Fasten the intake manifold with the specified retaining bolts, tightening them in order in torque to 12 Nm (105 in. lbs.). Making certain that the throttle body is fully tightened will prevent damage that might create trouble with the throttle plate. Then, fit the O-ring to the throttle body and attach it to the intake manifold in place; secure the connection with 4 mounting bolts tightened to 7 Nm (60 in. lbs.). Attach the electrical connector for the throttle body and then put in the fuel rail and EGR tube. Attach the MAP Sensor, CTS Sensor and ignition tower electrical cables while putting ignition coil towers in their place. Put on the retaining bolt of the top oil dipstick tube and install the Vapor purge hose, Brake boost hose and PCV hose. Give fluid to the cooling system, set up the assembly of the air inlet and resonator and finish by reattaching the cable from the negative battery terminal. Have the ETC Relearn function performed by using the scan tool.
Related 2007 Dodge Durango Parts
2007 Dodge Durango Air Filter
2007 Dodge Durango Gas Cap
2007 Dodge Durango Throttle Body
2007 Dodge Durango Fuel Filler Neck
2007 Dodge Durango Fuel Injector
2007 Dodge Durango Fuel Tank
2007 Dodge Durango Intake Manifold Gasket
2007 Dodge Durango Air Duct
2007 Dodge Durango Air Filter Box
2007 Dodge Durango Air Intake Coupling
2007 Dodge Durango Fuel Level Sensor
2007 Dodge Durango Fuel Pump Gasket