How to Remove and Service a Clutch Slave Cylinder on 2007 Dodge Nitro?

First, pry the actuator rod out from where it is attached to the clutch pedal pin to service or repair the Clutch Slave Cylinder. After that, take off the hose from the clutch master cylinder and plug it up to keep the inside fluid from coming out. After separating the pedal position wiring, disconnect the clip on the hydraulic line from the bottom of the clutch master cylinder. Turn the clutch master cylinder assembly clockwise a quarter turn and lift it off the brake booster mounting plate.

OEM 2007 Dodge Nitro Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2007 Dodge Nitro Slave Cylinder Part Number: 52060133AE
$112.62 MSRP: $171.00
You Save: $58.38 (35%)
ADD TO CART
Product Specifications
- Other Name: Cylinder - Clutch Slave
- Replaces: 52060133AD, 52060133AC, 52060133AB
- Item Dimensions: 9.5 x 5.0 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52060133AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- R/T, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Clutch Slave Cylinder Parts and Q&A

Q: How to Remove and Service a Clutch Slave Cylinder on 2007 Dodge Nitro?
A: First, pry the actuator rod out from where it is attached to the clutch pedal pin to service or repair the Clutch Slave Cylinder. After that, take off the hose from the clutch master cylinder and plug it up to keep the inside fluid from coming out. After separating the pedal position wiring, disconnect the clip on the hydraulic line from the bottom of the clutch master cylinder. Turn the clutch master cylinder assembly clockwise a quarter turn and lift it off the brake booster mounting plate.